Instructions for use of LG washing machine with dryer

Instructions for use of LG washing machine with dryer Washing machines have already firmly established themselves in our homes and apartments, and only a few probably do not know how to operate them. Gradually, improved versions of washing machines - machines and dryers - are conquering the market. A laundry drying function is added to the usual functions. Everything unknown is scary, so it may seem that using such a unit is much more difficult, although this is a misconception. Let us present the instructions for use for LG washing machines with dryers to make sure of this.

How to use a drying machine?

What to do when you have installed the washer and dryer and connected to all communications? Is it possible to run it and test how it works? Not recommended. Any good master will advise you to first run a dry wash to clean the insides of the drum from industrial dirt. If you haven't done it yet, do it.

If the machine is ready for use, check again whether it is connected to the power supply and whether the tee valve is in the “Open” position. Sort the laundry you have available for washing by color, type of fabric, or in some other way that is familiar to you. Load the first batch into the drum and close the hatch. Now the procedure will be like this: pour the powder into the LG CM with drying

Open the dispenser and pour detergent into the main wash compartment (the largest compartment). Push the tray in;
press the “Power” button and wait until the machine turns on;
set the washing program you need, adjust its parameters if necessary (spin, temperature, duration, rinsing);
press the start key;
wait until all washing stages are completed.After draining the water, you must remove half of the laundry from the drum.

Attention! A machine with a dryer can dry exactly half as much laundry as it can wash.

After the required amount of clothing remains in the drum, select from the proposed drying programs the one that suits you best (by fabric type, weight, etc.). Close the drum and press start. Repeat the procedure with the second batch of laundry.

Some models provide the ability to immediately start a complex cycle (where drying occurs immediately after all stages of washing, without interruption). When loading items into the drum, make sure you do not exceed the specified amount and that your fabric will withstand drying. At the end of the program, you will remove dry laundry from the drum. However, the option with the intervention of the hostess and separation of the linen is safer; after all, control in this matter will not hurt.

First launch of the new machine

As mentioned above, before full use, it is necessary to test drive the washing machine to make sure that everything is working properly, as well as to get rid of industrial contaminants inside the unit. Usually the installer does this, but if he didn’t do this, you will have to do the dry wash yourself. Also, during the test run you need to be nearby in order to respond to a problem in time if something happens. What do we have to do?

Connect the machine to the power supply.
Close the hatch door tightly until you hear a characteristic click.
Pour or pour powder or liquid laundry detergent into the dispenser (there are also special products for starting SM for the first time).
Select the “Cotton” wash program (temperature 90) and activate it.
Wait for the job to complete without moving far from the machine and observing its behavior.

During the cycle, pay special attention to sounds. There should be no strange grinding, clanging, humming or extraneous noise. At the end of the wash, carefully inspect the drainage system, hoses, look under the bottom of the washer, and check for leaks. Absolutely everything outside must be dry. Also pay attention to whether the machine coped with the task of draining the water, and whether there is stagnant water inside the drum.

Pay attention to how the washer moves. It should not jump or vibrate much. If this happens, you need to check whether the unit is installed correctly and whether work has been done to level the floor beforehand. If the suspicious “behavior” of the washing machine is difficult to explain, you need to contact the service center for advice from a specialist.

Why is it necessary to do the first wash dry? The fact is that due to industrial dirt residues, clothes can be spoiled by unwashable stains. And the point of a test run is to check the serviceability, and not to wash or dry clothes.