How to calibrate a Samsung washing machine

Modern washing machines that can determine the weight of laundry loaded into the drum need calibration. It is enough to configure the machine once, and in the future its measurements will be correct. How to calibrate a Samsung washing machine? The process will differ on different devices. As examples, let's look at several SMA models of this brand and more.

Models WF1602XQR and WF1702XQR

Few people know that some SMA models need to be calibrated before the first launch. The process of activating the calibration of the washing machine is described in the instructions for the equipment. Therefore, before you start setting up, read the user manual. For example, on Samsung WF1602XQR and WF1702XQR washing machines the algorithm of actions will be as follows:

plug the power cord of the machine into an outlet;
make sure that there are no foreign objects in the CMA drum;
turn off the machine using the “On/Off” button (there is no need to disconnect the SMA from the power supply);
hold down the “Temperature” and “Delay Wash” keys at the same time, and without releasing them, press the “On” button;
make sure that the inscription “CLB” or “_ _ _” lights up on the display of the automatic machine;
press the “Start” key (this activates the calibration mode).

Calibrating a Samsung washing machine takes about three minutes.

During calibration, the washing machine drum rotates in different directions. When the setting is completed, the message “END” will appear on the CMA display. Then the machine will turn off automatically. After this, you can start the desired washing program - the device will be completely ready for use.

WW**H2, 5, 7

In almost the same way, calibration is started on Samsung automatic machines, which were released onto the market in 2014.The difference is just one button, but you need to remember that too. What should owners of such Samsung models do:

turn on the machine by plugging the wire into the socket;
check that the washing drum is empty;
turn off the SMA using the power button (there is no need to unplug the power cord from the outlet);
hold down two buttons: “Temperature” and “Delay”;
without releasing the “Temp.” key and “Delay”, press the network button;
wait until the display shows “CLB” or “_ _ _”;
press the “Start” key to activate calibration;
wait about three minutes - during this time the washing machine will calibrate.

At the end of the mode, “END” will also light up on the display. This will mean that the calibration has been completed and the machine is ready for use. Now you can load things into the drum and launch the desired program.

WW12K8 series

This is another popular Samsung model. Some users have difficulty controlling it, considering the interface of the machine to be complicated. In fact, calibration is very simple:

connect the washing machine to the outlet;
make sure there are no things in the drum;
press the "Power" key;
hold down the “Power” button for a few seconds (until the display shows a menu with available options);
select “Calibration” and click “Ok”;
Press the “Start” key to activate the option.

The drum of the automatic machine will rotate in one direction or the other for about three minutes. When the setup is complete, the washing machine will turn off automatically. After this, the device will be ready for use.

How to activate the function on equipment from other brands

In fact, it is very simple to start calibrating a washing machine; the whole process takes a few minutes. The algorithm of actions will depend on the SMA model.Therefore, carefully read the instructions for the washing machine - all the nuances for putting the equipment into operation are described there.

Dexp machines are in great demand. They are distinguished by good software “stuffing”, high-quality assembly and at the same time low cost. To start calibration on washing machines from this manufacturer:

plug the power cord into the outlet;
make sure the drum is empty;
turn off the SMA, then turn it on again;
wait until the symbol “_ _ _” appears on the display;
hold down the “Spin” and “Delay” keys simultaneously (this must be done while the “_ _ _” icon is still lit on the display);
Click the Start button.

This will start the calibration. When finished, you will need to turn off the washing machine. The process is over - the settings have been applied, the machine is ready for use.

After resetting the SMA to factory settings, you will need to repeat the calibration.

Let's figure out how to calibrate a Weissgauff washing machine: Weissgauff WM 4927 DC Inverter

plug the power cord into the outlet;
make sure that the drum is empty, close the hatch door;
turn the program selector in any direction (at this time three horizontal lines will appear on the display);
While the “_ _ _” symbol is lit on the display, hold down the “Delay” and “Temp.” buttons;
wait until the display shows “t19”;
Click the "Start" button to start calibration.

Then all you have to do is wait until the Weissgauff SMA screen goes out. Then turn off the machine. After this, the machine will be ready for use.

And finally, Midea cars. The manufacturer strongly recommends that before starting calibration, install the device strictly at level and connect it to communications. When moving the washing machine from place to place or tightening the legs of the body, the calibration will have to be repeated.

To set up Midea SMA with auto-weighing option:

empty the drum and close the hatch door
connect the SMA to the network;
turn on the machine and hold down the “Spin” and “Extra Rinse” buttons;
wait until the display shows “t19”;
start calibration with the “Start” button.

After a few minutes, the washer will be calibrated. After this, the auto-weighing sensor will work correctly. You can load the machine with laundry and start the desired washing mode.