What paint should I paint my washing machine?

Every housewife wants her household appliances to be in perfect condition. This concerns not only the performance of the equipment, but also its appearance. Scratches, rust, dents - all this is not a reason to change your “home assistant”, but a reason to freshen it up a little. You can try to hide such marks, but it is much better to repaint the body of the washer so that you cannot find fault with its appearance. Let's figure out what paint to paint a washing machine to make it look like new.

We find everything you need

From the outside it may seem that there is nothing difficult about covering the SM body with paint, but in fact this process requires careful preparation. First of all, you need to understand why a color change is needed in the first place. If you just want to update the appearance of a machine that has no defects, then the work will not take much time and effort. But if you need to hide deep scratches with traces of rust, you will have to be patient. In this case, you will have to do anti-corrosion cleaning, and then additional primer of the body for the next coat of paint.

Then you need to decide on the color and type of paint. Nowadays, many types of paint are produced that fit perfectly on household appliances. It is worth choosing a product carefully, ignoring universal formulations, because otherwise the user risks using paint that will not withstand the constant heating and cooling of household appliances, as well as moisture from household chemicals.

Paint for a washing machine must be extremely durable, able to withstand high and low temperatures, otherwise it will quickly begin to crack and fall off during use of the washing machine.

That is why you should only buy specialized compositions for household appliances, for example, epoxy or acrylic aerosol paints from the brands Decorix, Kudo, Bosny, Veslee and others. This highly durable spray paint comes in small, convenient cans that will help both refresh the appearance of your device and protect it from scratches, rust, small dents and other damage. In addition, you can use paints for metal or plastic. They are easy to find in any hardware store, where they are presented in a wide variety of colors and types - glossy, matte, hammer effect, pearlescent, metallic colors, as well as classic RAL colors. But paint is not all that you need to buy at a hardware store for further restoration work. What else is needed? use Kudo paint

Painting film or tape that will help protect the handles, rubber parts and control panel from paint.
Sandpaper to remove paint, as well as sanding discs for the sander.
Solvent and other household chemicals necessary to clean the SM body from dirt and dust.
A primer that will help fill scratches and other damage to level surfaces.
Respirator and gloves needed to protect against harmful chemicals during repair work.

At this point the preparatory stage is completed, you can proceed to the restoration of the “home assistant”.

Getting the car ready

Do not rush to remove paint from equipment; first disconnect it from all communications and move it to a well-ventilated and lit room where it will be convenient and safe to work with it. It is also very important that the machine stands on a flat surface, and there is a lot of free space around it, so that nothing interferes with covering the body with paint on all sides.

The ideal location for restoration work is a garage or shed, or an outdoor covered space, weather permitting.

When you are ready to begin, remove the top panel of the washer and also remove the detergent tray. Then remove the plastic panel located at the bottom front of the CM housing. Finally, remove the plastic control panel, otherwise it will interfere with painting the internal end elements of the washing machine.

Next, be sure to remove all dirt, grease, hair and other debris from the body of the household appliance. Along with the stickers, remove the entire layer of old enamel, for which you will need sandpaper or a special paint removal chemical, for example, ABRO aerosol cleaner, which effectively removes any paint, even from the most difficult areas. If you have a sanding machine at home, you can use it to speed up your work. aerosol cleaner ABRO

You should then carefully inspect the surfaces to identify any cracks, scratches, dents or other damage that needs to be pre-treated. If the condition of your “home assistant” is far from ideal, then you will have to carry out anti-corrosion treatment, for example, using an ABRO rust converter.Next, level all problem areas with a converter that contains the properties of primer or full-fledged acrylic primer, for which products from the brands MOTiP, Veslee, Bosny, Kudo and others are suitable.

For convenience, you can use ready-made colored enamels that already contain rust neutralizers, for example, from the brands Decorix and Rust-Oleum.

During work, take into account the future color, because if you plan to cover the body of the washing machine with white, beige or other light paint, then only white primer will suit you. Accordingly, if you have chosen metallic, gray or dark colors, then you should choose a gray or black primer. Before starting work, be sure to carefully hide the parts with masking film or tape so as not to accidentally cover them with primer.

After removing the paint and laying down a layer of primer, prepare the required amount of aerosol enamel. This is very easy to do, because often manufacturers of compositions mark on the packaging the area that can be painted with one can. Typically a standard paint can is enough for about 1.5 square meters. In a situation where you decide to decorate your “home assistant” with a complex design, do not forget to mark the sketch by attaching a stencil to the body.

Coloring technique

Now you can proceed directly to applying spray paint, which must be done evenly, maintaining a distance of 30-40 centimeters. Keep the canister lever in one position so that the composition lays down in a nice, even layer. Never neglect personal protective equipment, which is necessary even in a situation where the paint has a non-toxic composition. For a better appearance, you can apply not one, but two layers of paint.In this case, you will have to wait a little until the first layer of aerosol enamel is completely dry. washing machine painting

At this point, the restoration work is almost complete. All that remains is to remove all the protective masking film or tape, as well as the stencil, if you used one. Be sure to evaluate the resulting result and correct the shortcomings, since you probably have some enamel left that can be used to eliminate flaws. For a better effect, you can additionally coat the washer with a fixing varnish, for which products from the Bosny and Veslee brands are perfect.

As you can see, in order to freshen up the look of your favorite “home assistant,” you don’t have to call a professional, because you can do the job yourself. This will also not greatly impact the family budget, because you do not need to purchase any expensive tools, and the necessary compounds are not that expensive. As a result, you will receive reliable protection from new cracks and rust, plus, you will update the appearance of your household appliances, which will fit even better into the interior of your home.