Error codes for dryers Vyazma

Error codes for dryers Vyazma Machines filled with electronics, even without user intervention, can perfectly detect problems. This also applies to Vyazma industrial dryers, which are capable of promptly identifying errors in the system and warning the user about them. This is very convenient, because you can quickly check the symbol on the display with the information in the user manual to immediately understand what exactly is wrong with the device. We will analyze the main breakdowns of “home assistants” to make it easier for you to act in a situation where the instructions are not at hand, and the device needs to be restored somehow.

What ciphers can you encounter?

Any fault code in a Vyazma dryer indicates a problem with the operation of the device. To understand what exactly went wrong, you should study the decoding of the designation in the official user manual. This is the only way to determine the faulty part of the system.

In rare cases, an error does not appear due to a unit failure, but due to a one-time electronics failure, so this option should not be discounted either.

Due to possible electronic failure, it is not advisable to immediately call a service center or begin repairs yourself. First you need to make sure that it is not a one-time failure that is to blame. What should I do for this?

Disconnect the equipment from the electrical outlet.
Leave it like this for at least 15-20 minutes.
Connect the unit to electricity.
Try to restart the previously selected work cycle.

If after the manipulations the fault code remains in place, then the machine really needs a thorough inspection and repair. Let's look at what the symbols on the CM display mean. dryer Vyazma in the laundry

Er0 is a hardware error associated with a faulty hardware part of the controller.
Er1 – reports an incorrect crc code due to program corruption.
Er2 – program error due to a failure during operation.
Er3 - informs the housewife that the drying settings were incorrectly set, or they were not set at all.
Er4 – a message that the temperature sensor specified in the program is not connected, or this element is simply programmed incorrectly.
Er5 – damper sensor error, which may appear due to lack of traction or damage to the sensor itself. There may also be problems with ventilation or commissioning.
Er6 – problems with the sunroof sensor, associated with an open hatch or damage to the sensor.
Er7 - this code occurs due to the fact that for some reason there is no heating, for example, due to a failure of the temperature sensor.
Er8 – overheating error, which appears due to the fact that the temperature in the system exceeds emergency values.

It is logical that the Vyazma drying machine acts differently in different situations. Thus, the first two errors from this list cause the controller to be blocked from starting. If the equipment suffers from errors Er3, Er4 or Er6, then the start of drying modes is blocked. If fault codes Er2, Er5 and Er6 occur, the dryer completely stops the operating cycle, and the display shows the corresponding status, which can be reset by pressing any key.

All detailed information about problems with drying equipment can be found in the official instructions for the KSM-509H controller, which comes complete with the Vyazma drying machine.

At the same time, if Er4 malfunction occurs, heating will be blocked right during the cycle, and the temperature value on the control panel will begin to flash. Thus, all further stages of the program (drying, blowing and shaking) will take place without heating. Finally, if a housewife encounters an Er8 error, the “home assistant” will stop heating until the temperature drops below emergency levels.

Can't start the drying process

Different household appliances from different brands have their own common problems. In Vyazma drying machines, as typical faults, it is worth highlighting errors in the operation of the temperature sensor, electric motor, heating element and capacitor. In addition, repair service employees additionally note deformation of the drive belt, bearings, as well as severe oxidation of the terminals. Thus, if your dryer suddenly stops working, although it only recently dried clothes without problems, then first of all you need to check a number of elements.

Temperature sensor. Maybe the element itself does not need repair, but the contacts are simply disconnected, or maybe the sensor is really faulty.
Engine. It could become unusable due to a strong voltage drop in the network.
Launcher fuse or switch. These elements cannot be repaired if damaged, so you will have to buy new spare parts.

In addition to these reasons, you should also carefully examine the terminals. Due to the fact that they are constantly exposed to moisture due to high humidity, they could oxidize. If this is indeed the case, then simply clean and wipe all contacts dry.

You also need to check the capacitor to see if it is overfilled with various debris. This can be lint, threads, wool and other contaminants that disrupt heat transfer and prevent the removal of moisture from the working chamber. It is very easy to fix this problem with your own hands - you just need to thoroughly clean the container of debris.

You should also always check the tightness - whether the hatch door is tightly closed, which is why the dryer may also not turn on. The door must be closed not only with a mechanical lock, but also with an electronic unit. Therefore, if you do not hear a characteristic click, then you need to press the hatch harder.

Make sure you do not accidentally activate the delayed start function, which may prevent drying from starting for a long time.

In addition, a trivial situation is possible when the “home assistant” does not turn on due to the lack of light in the house. Check that the electricity has not been cut off, and if everything is fine with the power, then try checking the outlet by connecting other household appliances to it.

Dryer drum does not rotate

Additionally, it is worth considering the unpleasant situation when the Vyazma dryer turns on and responds to commands, but as soon as you start the work cycle, and instead of drying, the machine will first do nothing and then display a fault code. In such a situation, the drum will remain motionless all the time. This may be due to the following:

the axle on which the dryer drum is installed has worn out;
the electric motor broke down;
The motor capacitor has failed;
the drive belt is deformed or torn;
The drum bearings are worn out.

In this case, the machine can only be repaired by partially disassembling household appliances and replacing damaged components.It’s not difficult to do this yourself, so you don’t have to spend your budget on calling a repair service. At the same time, it is even easier to prevent such breakdowns.

Never overload the drum. Carefully read the instructions to find out the maximum weight of laundry that can be dried at one time. For example, if you have a machine designed for 11 kilograms of clothes, then you cannot load 12 kilograms or more into it. This will increase the risk of damage to the drive belt and bearings.
Always carefully distribute items inside the drum, placing them evenly to prevent the machine from becoming unbalanced.

Also, for increased safety, it is worth purchasing a basic voltage stabilizer. This useful device will provide the device with protection from sudden voltage surges, which often cause the Vyazma dryer to fail.

The machine knocks out and the equipment is de-energized

Finally, you should look into the common situation where dryer equipment regularly knocks out the machine. To fix this problem, you need to carefully check everything and find the cause of the problem. This usually occurs under the following conditions:

the contacts of the control board have oxidized;
the power cord of the machine or the socket to which the SM is connected has failed;
the heating element has closed;
the motor winding is damaged;
the power filter is broken;
there was a software failure.

Regardless of the suspected cause of the breakdown, you first need to disconnect the Vyazma dryer from the power supply. Next, you should read the user manual, which contains a detailed diagram with the location of all internal components of the device - this will help you quickly find the suspected faulty component.Moreover, if you are not confident in your abilities, or have no experience at all in repairing household appliances, then it is better not to risk damaging the device even more, but to immediately call a service center employee.