How to restart the Hotpoint Ariston washing machine?

How to restart the Hotpoint Ariston washing machineFor each type of household appliance, there are ways to correct emergency situations. To restore the functionality of washing machines, you can use reset parameters. If the automatic machine does not act for a long time, then in this case, sometimes it is enough to restart the Hotpoint Ariston washing machine. This can help restore the equipment to working condition.

Options for restarting equipment

If the Ariston washing machine freezes in the middle of washing and does not perform the specified functions, then resetting the parameters and starting the program again can help to restore it. To restore functionality, you must press the start button and hold it down for 10 seconds. The set program will be cancelled. After this, you need to re-set the parameters and start the required washing mode.

Perhaps an old-generation automatic machine, in this case it is enough to move the program selection knob to the neutral position. When the program is stopped, the indicator on the control panel should turn green and go out.

If light indexing does not occur, this may mean that the device is faulty or the equipment was stopped incorrectly.

If the program reset fails, a complete reboot may be required. In this case, you should do the following:

  • the programmer knob must be moved to the neutral position;
  • press and hold the “Start/Start” button for five seconds;
  • disconnect the equipment from the network by unplugging the power cord from the outlet;
  • After 15-20 minutes, connect the machine to the network and launch the desired program.press the start button and hold

If the washing machine does not respond to pressing or turning the handle, you should immediately disconnect it from the network. It should be remembered that turning off the power while the modes are running can cause damage to the main control unit. If the actions do not help restore the functionality of the equipment, then you need to call a technician to repair the equipment.

You also need to drain the water

There may be an emergency need to access things (forgot your keys, money, phone in your pockets). In this case, it is not necessary to completely overload the Ariston washing machine. It is enough to stop the washing process, drain the water and open the door.

The algorithm of actions is as follows:

  • the program is stopped by pressing the “Start/Start” button;
  • the washing mode selection knob is set to the neutral position;
  • select the “Drain” mode without the spin function;
  • you need to wait until the water is removed and the door is unlocked.

If the functions of the automatic machine do not work, then you can drain the water using a compartment with a garbage filter. It is located at the bottom of the device on the right side on the front of the machine behind a special door. Before draining the water through the garbage filter, we recommend preparing rags and a bucket for water.use the drain function

If the power is cut off or there is a failure

If an unexpected power outage occurs, the equipment must be de-energized. To do this, you need to unplug the power cord from the outlet. Such actions will help to avoid breakdowns when voltage is suddenly applied.

After the power supply is restored, connect the machine to the network.If the program does not restart, the Ariston washing machine will continue to perform the set mode. On some models there is a special function that, after power is supplied, drains the water and goes into the neutral position. In this case, you need to select the mode again and start the washing process.

If problems occur, you need to find out the cause of the failure. There are two types - software or mechanical failure. In the event of a software failure, the control panel is locked and does not respond to presses. To correct the situation, you need to disconnect the washing machine from the power supply for 15-20 minutes. After that, connect to the network and start the required mode again.

If a mechanical breakdown occurs, you will have to use the services of specialists. They will find out the cause of the breakdown, make repairs or give recommendations for further action.

   

3 reader comments

  1. Gravatar Alexey Alexei:

    Great article. Respect to the author.

  2. Gravatar Maria Maria:

    Thank you for your content.
    I rent an apartment for daily rent, there is an ancient washing machine, stuck with my things halfway there. Thanks to your tips, I reset the washing program and the clothes are washed again :)

  3. Gravatar Evgeniy Evgenia:

    Thank you, kind man, you helped a lot! Competent explanation.

Add a comment

We recommend reading

Washing machine error codes