First start of the washing machine without laundry

After purchasing a washing machine, owners can’t wait to test their “home assistant” as soon as possible. But there is no need to rush in this matter; it is important to properly start the machine for the first time in order to protect it from breakdowns in the initial stages of operation. You need to turn on the washing machine in compliance with several rules.

The basic rule is to perform the first wash in a washing machine without any laundry. It is also important to remove all shipping bolts before starting. Thirdly, it is necessary to correctly install the machine and connect it to communications. Let's look at all the nuances in more detail.

Getting ready to put the machine into operation

The rules for the first start are the same for any washing machine; the scheme of actions does not depend on the device model. When purchasing a new machine, be sure to read the user manual - it contains all the necessary information about the equipment. The instructions for the equipment spell out all the nuances: how to properly connect the machine, align the body, and start washing.

It is important not to forget to remove the transport bolts from the washing machine tank before starting the machine for the first time.

Transportation bolts are necessary to securely fix the tank and drum of the washing machine during transportation. Due to the fasteners, the unit does not dangle in the body, thereby ensuring the safety of the internal parts of the machine. Before connecting the device to communications, be sure to remove the screws.

If you start the machine with transport bolts, the engine will spin the drum, which, in turn, will be fixed with screws. As a result of excessive load, the main components of the washing machine can quickly fail. Before starting the machine for the first time, make sure that:

• the washing machine is connected to communications;
• the transport bolts have been removed from the tank (depending on the model there can be from 4 to 6, it is better to look at the exact number in the instructions);
• the body of the “home assistant” is level, the legs are adjusted;
• there are no foreign objects left inside the drum, for example, tools used to install the washing machine.

If all conditions are met, you can start the first wash. The test cycle is also performed according to certain rules. Let us tell you what recommendations we are talking about.

Let's carry out the first launch of the SM correctly

Having leveled the washing machine and connected it to the communications, you can move on. The first wash must be run “idle”, that is, without items in the drum. This is necessary so as not to spoil the laundry.

Any washing machine is tested at the factory before being put on sale. Therefore, traces of technical fluids, oil stains, and dirt remain inside the machine. This is why the drum must be empty during the first cycle. During the “idle” washing process, the machine will be cleaned of debris and “ventilated” from unpleasant, chemical odors.

When activating your automatic machine for the first time, follow these instructions:

• close the drum door tightly (remember that there should be no clothes in the washing machine);
• pour powder into the tray (required for automatic washing machines; granules designed for hand washing are not suitable). Liquid detergents can also be used;

During the test cycle, the detergent load should be 2 times less than for normal washing with laundry.

• turn on the machine (be sure to connect the equipment directly to the outlet without using an extension cord);
• Use the selector knob to select the “Cotton” program or another long mode, and press the “Start/Pause” key.

Now you should watch the “home assistant”. Normally, the following points will be recorded:

• the drum moves in accordance with the stage of the cycle (slower when washing, faster when spinning);
• the water warms up to the set temperature in 5-7 minutes;
• no leaks are observed;
• there is no extraneous noise;
• water is drained properly;
• When spinning, the centrifuge “accelerates” to the specified speed.

If you notice any significant malfunction, you need to stop the washing and turn off the power to the automatic machine. Water is drained through an emergency hose or waste filter. New washing machines are under warranty, so you should not disassemble the equipment yourself in an attempt to repair it. It is better to call the service center - diagnostics and maintenance of equipment under the warranty card will be free.

Start-up chemistry

Many users are interested in whether it makes a difference which detergent to use when starting up the washing machine for the first time. It is allowed to pour or fill the tray with any powder or gel for automatic washing. There are also special compounds that cope more effectively with factory dirt and odors. For example, Helfer Start HLR0054.

This product can cope with traces of lubricants. The main components of Helfer are surfactants, which effectively clean the “insides” of the washing machine from stains of fuel oil, oil and carbon deposits. The composition can be used for any type of machine. The product is used by analogy with conventional powder:

• one Helfer Start package is poured into the powder receptacle;
• the washing mode is selected (this should be a long program with water heating to 60 degrees, for example, “Cotton”);
• The test cycle is activated.

In fact, there is nothing difficult about starting an automatic machine for the first time. The main thing is to adhere to a few basic rules prescribed in the instructions for the equipment.

Don't forget to take care of your machine

In order for your washing machine to last for a long time, you need to take proper care of it. On this side there are also several simple and at the same time effective recommendations. Users need:

• after each use, wipe the surface of the drum and the sealing collar of the hatch from dirt and moisture, rinse the powder receptacle and dry it;
• Keep the drum door open to ventilate the machine. This will help prevent the appearance of mold and musty smell in the washing machine;
• Clean the garbage filter regularly (about once every 2-3 months);
• use only high-quality detergents for washing, not exceeding the dosage indicated on the packaging;
• periodically treat the insides of the machine from scale.

It is also advisable to install a filter in front of the washing machine. This will prevent various impurities contained in tap water from entering the machine. The filter element is mounted in front of the inlet hose.

Proper care and timely maintenance are a guarantee that the automatic machine will last as long as possible. If you follow all the recommendations, you can significantly extend the maintenance-free period of equipment operation.

Reader comments

• Share your opinion - leave a comment