First launch of Samsung washing machine

First launch of Samsung washing machine Experts unanimously say that after installation and connection to communications, the washing machine must be run empty, without laundry. Firstly, all production waste will be washed away, and the laundry will not get dirty, and secondly, this will also benefit the unit itself. However, the first launch does not imply amateur performance at all: there are clear instructions that must be followed strictly if you want everything to be in order. Let's look at how to start a Samsung washing machine for the first time.

Is the machine ready to start?

The first thing the owner of a new washing machine needs to do is understand its controls. Open the instructions, look at the transcripts of all the images on the control panel, figure out which key is responsible for what. Next, you need to make sure that the unit is ready for the first wash. Go through the 4-point list to find out.

Reliability of fastenings. As a rule, if the car is installed by a professional, there are no problems with fastenings. If the user does this on his own, he may, for example, not tighten the clamps on the hoses tightly enough, which will lead to leaks during the first start.
Transport bolts. These are fasteners whose purpose is to hold the tank in a stationary position during transportation so that the shock-absorbing system remains intact. Washing with transport bolts is a real test for equipment; this process leads to serious damage inside the unit, so before the first start, you must replace the bolts with the plastic plugs included in the kit.
Drum contents.Some removable parts may be placed inside the drum before transportation. Of course, before the first wash they need to be removed from there.
"Package". In the store, before transportation, they try to protect the SM to the highest level, covering it in some places with tape or adhesive tape, covering it with cotton wool or polystyrene foam, even fixing it here and there with plastic ties. All this will need to be eliminated before the test wash.

Important! As for transit bolts, damage caused by them is not covered by warranty repair.

If you have taken care of all the details, you can start the pre-wash. Remember that this cycle is not complete; it is sometimes called a test cycle. Why it is needed and how it is carried out, we will tell you further.

Pre-start of the machine

Of course, at first glance, there is nothing difficult about starting the machine for the first time. Connected to the power supply, opened the water valve, loaded the laundry, started the program - and you're done! But the technical cycle has a number of subtleties.

Pre-launch necessarily involves washing in an empty drum. The “idle” cycle solves 2 problems simultaneously:

washing out industrial lubricant residues from the insides of the lubricant and, as a result, eliminating the unpleasant industrial smell that comes from the lubricant;
checking the functionality of the unit with minimal risks. How does the water fill up, is it very noisy, are there any increased vibrations and extraneous sounds, etc.

During the test wash, the laundry is not placed in the drum, since those very traces of industrial grease and the smell emanating from it can be transferred to the clothes, and it will be extremely difficult to wash them after that: the grease is quite greasy and firmly eats into the fibers of the fabric. But keep in mind that even though the cycle is carried out without laundry, the presence of detergent is mandatory! It will effectively remove dirt and odors from the drum.

If suddenly during a test run you discover any problems, be it technical problems (leakage, breakdown, etc.) or problems with the “electronic filling” of the unit (error code, program failure, etc.), immediately Call a specialist from the service center to your home. Most Samsung washing machines come with a warranty of up to a year.

Studying the settings and starting the machine normally

The choice of program during a test run is not decisive. But when you are about to fully wash your clothes, a suitable mode is the key to success. After all, if the temperature is set incorrectly or the spin is too strong, things can suffer. On modern Samsung washing machines, choosing a mode is a whole task, because the functionality of the models is very extensive.

In the user manual, the manufacturer always describes all the modes available in the machine’s arsenal, their main characteristics, as well as symbols on the control panel. So be sure to read the user manual and determine the program you need based on the information written there.

The color of the laundry and the fabric from which it is made are fundamental factors when choosing a washing program. In general, the algorithm for starting the first wash looks like this:

plug the plug into the electrical outlet;
open the water valve;
sort the laundry and load the batch into the drum, while not forgetting about the permissible load volumes. You cannot put more than the maximum volume into the drum, or less than the minimum;
slam the hatch door;
add detergent;
install a program that suits you and, if necessary, adjust the parameters (on Samsung washing machines you can adjust the temperature, spin, cycle length in specified ranges);
start the mode and wait for it to finish.

You will not forget about the end of the wash, as Samsung washing machines notify users about the end of the cycle with a sound signal. However, do not rush to immediately remove the laundry from the drum. The locking device keeps the door in the locked position for another 2-3 minutes after the end of the wash.

Where should I pour the powder and conditioner?

On the left side of the body there is a box for powder, otherwise it is also called a dispenser. This is where conditioner/detergent, etc. is poured/filled. To gain access to the dispenser, simply pull it towards you.

To use detergent correctly, consider several nuances:

use only detergents that are suitable for your type and color of laundry;
consider the type of detergent depending on the type of washing (for automatic, semi-automatic, hand washing);
For correct dosing, use a measuring cup;
The dispenser has three compartments, each for a specific type of detergent. It is important to choose the right section. In Samsung washing machines, the left one is responsible for the main product, the central one is for conditioners, bleaches, rinse aids, and the right one is for pre-soaking.

Note! As an alternative to detergent, the household chemicals market offers multi-component capsules, granules, tablets or washing wipes; they are placed not in a dispenser, but directly in the drum, but are quite expensive.

Take into account the basic recommendations

There are simple rules that extend the life of the machine by an order of magnitude.For high-quality washing without problems or breakdowns, follow these simple recommendations:

make it a rule to look at the instructions more often;
Don't neglect water softeners;
do not change programs during the washing process;
After completing the cycle, leave the hatch door slightly open;
Do not use the top wall of the washing machine as a surface for heavy objects.

Don't be afraid of the first wash on Samsung washing machines. If you follow all the recommendations, act according to the instructions and be careful, the process will go “without complications.”