How to use the Atlant washing machine?

Frontal washing machines have a lot in common, so housewives who have previously used machines from other manufacturers can easily cope with the machines assembled by the Belarusian company. However, there are still some nuances and features inherent in the technology of a particular brand. We’ll figure out how to properly use an Atlant brand automatic washing machine and how to properly prepare the equipment for use.

Pros and cons of machines of this brand

Atlant washing machines have been produced since 2003. The Belarusian company of the same name specializes exclusively in the assembly of units, purchasing components from foreign manufacturers. If we talk about the advantages of machines of this brand, we can highlight:

• affordable price of equipment;
• adaptability of equipment to hard tap water, “spikes” of electricity;
• machine reliability;
• high quality washing, corresponding to class “A”;
• wide functionality. The Atlant washing machine software provides various add-ons, options and functions that make it possible to run a wash of any complexity;
• simple interface and convenient control of the device. A digital screen or clear display allows users to monitor the work process;
• low noise level. Of course, the machine will be heard, but the sounds will not disturb the peace of family members and, especially, neighbors;
• efficiency of most Atlant models. First of all, this relates to low energy consumption. By the way, not all cars are so economical, so when buying you should pay attention to this indicator;
• wide range of equipment.Among Atlas it is easy to find the narrowest models that are suitable for small spaces;
• long term of maintenance-free operation;
• ability to lock the control panel when washing. This will avoid accidental interference in the operation of the equipment;
• maintainability of machines. The machines are very easy to repair; the necessary parts can be purchased in stores or on the Internet, and the price of spare parts is low.

These are general advantages; the advantages of specific models need to be analyzed separately. If we talk about the disadvantages of Atlanteans, we should highlight:

• Not a good spin. Water is discharged according to the standard values ​​of class “D”, and these are practically the lowest indicators. Some machines vibrate strongly during the spin process, so they “jump” around the room, moving significantly from the initial installation location;
• equipped with collector motors. Such motors are much inferior to inverter motors in terms of reliability, efficiency and durability;
• lack of a sensor monitoring the level of foam in the drum. This can cause individual breakdowns and lead to leakage;
• imperfections in the design of individual models. For example, opening the door is accompanied by pouring a small amount of water onto the floor. Also, debris often accumulates between the drum and its ribs.

Before buying a specific Atlant washing machine, you should carefully read its characteristics and study real customer reviews. This will help you understand all the pros and cons of the unit in advance.

Program overview

Proper use of a washing machine requires careful study of all washing modes.This is necessary in order to correctly set the program depending on the type of fabric and intensity of contamination.

The most budget Atlant models have at least 15 special modes that allow you to select the optimal washing parameters.

The software of Belarusian machines allows you to work with things made from different fabrics, wool, and even natural and artificial leather. A detailed description of the programs, as well as additional options, is presented in the instructions for the equipment. Let's briefly talk about the main washing modes found on Atlant machines.

• Cotton. The program is ideal for washing bed linen, cotton items, towels, etc. You can select the degree of water heating - from 30°C to 90°C. The duration of the cycle ranges from 1.5 to 2.5 hours.
• Synthetics. Such fabrics are easily deformed and subject to shedding. Therefore, in this mode the liquid is heated to a maximum of 60°C; you can also choose 40°C. The program takes approximately 2 hours to complete, spinning at maximum speed.
• Delicate. Mode for washing clothes made of silk, satin, cashmere and other “sensitive” fabrics. The cycle lasts about an hour, the water warms up to 40 degrees. Spinning is not provided, the drum rotates slowly and gently.
• Prewash. It starts when things are very dirty. The machine will start the preparatory wash first and then the main wash. It is important not to forget to pour the powder into the second section of the tray.
• Intensive wash. Suitable for clothes made of durable fabrics that are not subject to deformation. The water is heated to 95°C, the cycle lasts 2 hours. It starts when you need to remove old or difficult to remove stains from your laundry.
• Express wash.Suitable for lightly soiled clothing. Treatment allows you to refresh things and cope with odors. Washing lasts from 15 to 45 minutes. Temperature range – 30-40°C.
• Baby clothes. The program is ideal for washing “baby” accessories – diapers, panties, undershirts. The water warms up to high temperatures. A long rinse is also provided to completely wash away the powder particles.
• Sport. The mode was created for processing suits and sets for sports training. Sneakers and sneakers can also be thrown into the drum for cleaning.
• Combi wash. When running this program, you don’t have to pre-sort your laundry. Suitable for both cotton and synthetic fabrics. But you still need to monitor the color of things to prevent light-colored clothes from staining.
• Night wash. Provides for turning off all sound signals, reducing noise and vibrations.
• Biophase. The mode starts if an organic or protein stain is placed on the fabric, namely from wine, cosmetics, plants, etc. It is very difficult to remove it, but using this program and enzyme, it is quite possible.
• Easy ironing. A weakened spin cycle is assumed, as a result of which the clothes remain slightly damp, which makes subsequent ironing easier.
• Rinsing. Things are cleaned of any remaining soap solution. Detergent compounds are removed not only from above, but also from inside the fabric fibers.
• Spin. If at the end of the program the laundry is very damp, you can start spinning again. The process will last approximately 5 minutes.

Before using the washing machine, it is better to carefully study the instructions and understand the characteristics of each mode. You should also understand what additional options and features are available in your Atlanta.This will help achieve maximum washing effect.

Connection and preparation for operation

After the washing machine is delivered from the store, you should carefully remove the original packaging and unscrew the shipping bolts. These screws secure the drum, protecting the structure from damage during transportation. In order for an automatic machine to last as long as possible, you need to connect it to house communications and the electrical network, following the basic rules.

• Electrical connection. It is important to ensure that the voltage level in the network complies with the standards. If there are any discrepancies with the machine's specifications, it is better to install a stabilizer. The extension cord (if used) must withstand power in the range of 2500-3000 W.
• Water pipes. As standard, a water tee is used here. A shut-off valve is also installed at the point where the inlet hose is connected to the pipe. It is advisable to install a filter to purify the incoming water.
• Sewerage. It is possible to organize a temporary outlet; in this case, the drain hose of the machine is directed to the bathtub or sink and fixed with a special hook. This method has one advantage - minimal time consumption. The disadvantages include the likelihood of flooding if the sleeve comes off, and unhygienic conditions. It’s better to work hard once and connect the drainage permanently. To do this, use a special drain siphon or discharge directly into the sewer pipe.

Schemes for connecting the washing machine to communications are described in the instructions.

When organizing drainage, it is important to maintain regulatory distances. The connection point of the drain hose to the siphon should be located at a level of 50 cm from the floor. Otherwise, water may leave the machine by gravity.Also, if you do not follow the recommendations, waste liquid may enter the washing machine and an unpleasant odor from the sewer may enter.

The first use of the unit must be carried out under close supervision. The test wash is started with an empty drum. During the cycle, it is recorded whether there are any leaks, how water is collected, and how quickly the drum accelerates.

It is important to carry out the first wash without laundry, but with detergent. This is necessary to wash out all the factory dirt from the system and remove the specific smell of new equipment.

Then you can put the laundry in the machine and start the program. The algorithm of actions will be as follows:

• sort things, load the batch into the drum (without exceeding the maximum permissible weight);
• close the door tightly;
• load powder, conditioner, bleach (if necessary) into the dispenser sections;
• press the “On” button;
• use the selector to select the desired program;
• click "Start".

The stages of the cycle will be displayed. When the work is completed, the machine will emit a characteristic sound signal. The washing result directly depends on the quality of the detergents used; special attention should be paid to this.

Clean your machine regularly

In order for the Atlant machine to last as long as possible without requiring repairs, it is important to take care of it. It is necessary to clean the washing machine in a timely manner, “rinse” it from the inside, ventilate it, and remove deposits.

The washing machine must be properly maintained after each wash cycle.

In order for the cleaning process to proceed safely, you should disconnect the machine from the power supply and turn off the water supply valve. Afterwards, wipe all external surfaces of the unit with a damp, clean cloth.You should also be sure to remove the powder receptacle, rinse it with warm water, dry it, and only then put it back in place. The washing machine door should always be slightly open to prevent moist air from stagnating inside.

The surface of the drum also needs to be cleaned. After each use of the machine, it is enough to wipe it with a soft, wet cloth. The hatch door cuff is cleaned with a dry cloth. The washing machine should be periodically “rinsed” from the inside to prevent the formation of scale on the main components and elements of the machine. To do this, you can buy special cleaning compounds or resort to folk remedies, for example, citric acid or soda and vinegar.

It is also important to wash the debris filter. It serves to protect the drain pump and “catch” foreign objects that have entered the system (paper, coins, buttons). Cleaning frequency – once every 6 months. The filter element is unscrewed from the housing, washed with cold water and installed in place. Additionally, the filter must be rinsed after washing woolen items with long pile.

The water supply system also has 2 filters: in the inlet hose and in the pipe. It is recommended to clean them once a year, under pressure of water, using a brush.

Thus, there is nothing complicated in using the Atlant automatic machine. It is important to carefully study the instructions for the equipment, correctly connect the equipment to communications and provide it with proper care during further operation.

Reader comments

• Share your opinion - leave a comment