Is the tank of the Candy washing machine collapsible?

Progress does not stand still, but moves forward by leaps and bounds, so it is not surprising that users expect more from their household appliances. In particular, owners of “home assistants” want their machine to break down less often and be easily repaired with their own hands. The same requirements apply to the unit tank. If it cannot be disassembled, it means you will have to spend a lot of money on replacing the bearings. Just today we will find out whether the Candy washing machine has a collapsible tank.

How are the halves of the Kandy machine tank connected?

Almost all modern units of the mentioned brand have a non-removable tank. This format helps reduce costs, and the absence of additional fasteners and bolts in cast tanks makes the production of these devices more economical.

The bet is also placed on the subsequent sale of components. For example, when bearings fail, many users prefer to purchase a ready-made design rather than bother with repairs. This brings additional income to the manufacturer.

Craftsmen have long developed a way to divide a non-separable tank and put it back together without losing the integrity of the structure. To do this you will need a hand saw. The algorithm of actions will be as follows:

• on the side edge, mark holes at intervals of 5-7 cm;
• drill holes;
• carefully cut the tank along the factory seam;
• use a drift and a hammer to knock out the old bearings;
• install new components;
• assemble the tank.

The plan seems pretty simple. However, in reality, the work ahead is very painstaking.It is necessary not only to carefully separate the tank, but also to replace the bearings by installing new rings. Therefore, we will look at each stage of action in more detail.

First of all, you will need to wipe the tank with a damp cloth and mark points around the perimeter of the factory seam. It is important to make holes at a distance of 5-7 cm, and the drill should have a diameter of 3-5 mm. Then you will need to arm yourself with a hacksaw and carefully cut the tank along the seam. At the rear of the structure you will find the drum, bearings and oil seal. We will continue to work with this “forecastle.”

After these manipulations, you need to remove the drum from the plastic half. In order to do this, you will need to unscrew the pulley and knock out the shaft. The next step is dismantling the broken bearings. They are knocked out using a drift and a hammer. The tool is placed on the inner race, and each bearing is tapped in a circle.

If the parts do not give in, spray them with WD-40 and leave for 15 minutes - this will make it easier to remove the rings!

When you are done with pressing out, clean the seat from dirt. The drum shaft will also need to be wiped and polished. Only after this we begin installing new bearings.

The rings should always be replaced in pairs. An equally important element is the rubber seal. Before you begin installing the bearings and oil seal, be sure to generously treat them with special lubricant.

After the bearing has been lubricated, it will need to be placed in the seat and pressed in with a drift. Tap the element along the outer edge. When the ring is in place and rests against the side, a dull sound will be heard.

The oil seal is placed on the inner bearing. The rubber band for sealing must also be generously lubricated.It will prevent water from entering the unit, and this will extend the life of new spare parts.

Next, we fix the drum in the rear forecastle. Having put the pulley in place, tighten it with a screw. In order for the two halves of the plastic container to stick together, you will need a high-quality moisture-resistant silicone sealant. It will need to be applied around the perimeter of the halves and the parts connected. The points that were drilled will serve to tighten the two forecastles with screws.

Now you can begin reassembling the machine. Return the plastic container to its place and connect the wiring of the heating element, motor, and drain pipe to it. Then install the back and front panels, garbage filter and other elements.

Based on the above, the question of whether the Candy tank is collapsible or not can be answered in the negative. The company does not use such tanks. The reason for this is that such a design does not provide sufficient strength.

About the reliability of components and build quality

Most Candy washing machines are assembled in China, but this should not cause you concern, because the brand strictly controls the quality of its products, which ensures a long service life of their “home assistants”. Such machines are distinguished by high quality components, reliable assembly and are famous for their well-thought-out design and design. Their body is reinforced, the internal metal is painted, the wiring does not sag anywhere and is securely fixed.

The control module of such a washing machine is located on top of the equipment and is made on a printed circuit board without compound.This thermoplastic resin has become the subject of controversy among service center specialists, because on the one hand, the potting material ensures the tightness of the control module, while on the other hand, it interferes with heat dissipation, which is why board components risk overheating and failure. However, this component is quite actively used by such manufacturers of household appliances as LG and Samsung.

Candy washing machines do not use compound!

The unit has a metal pulley, a belt drive and a standard commutator motor. The advantage of the drive mechanism design is that its parts are not only high quality, but also inexpensive. In addition, they are also affordable, so if a breakdown occurs, the unit can be easily restored. Commutator motors have long proven themselves to be excellent because they work for a long time and are easy to repair with your own hands. If it turns out that you can’t fix the problem, you can simply buy a new element.

The drain pump uses a part made in China. It can easily last longer than the washing machine itself, if you carefully monitor the filling of the pockets of dirty clothes. Never allow keys, paper clips, coins or other objects that could damage the internal components of the equipment to get into the drum.

The elements that are responsible for heating the water are located at the back of the equipment. This allows easy access, making them easier to repair and replace. Due to the poor quality of tap water, even modern heating elements can often fail, so it is important that they can be easily reached and restored.Finding the heating element is quite simple: you just need to open the back panel of the case, and the heating element will be right in front of you. In order to replace it, you will need:

• clean the drum of water and things, and then disconnect the washing machine from all communications;
• move the unit so that it is convenient to approach it;
• remove the back panel and drive belt;
• disconnect all connectors connected to the heating element and release the clamps with a screwdriver;
• unscrew the nut located in the middle and carefully remove the element from the mounting socket.

In addition to all of the above, Candy devices are equipped with a high-quality gasket on the drain hose, which protects the hose from strong vibration, as well as a reinforced bar to secure the drain pump. The manufacturer used a special approach even to the packaging of its products. It is equipped with additional seals to make transporting equipment convenient and safe.

We did not consider only the electronics of the newest models, since the equipment appeared on our market not so long ago. Only time will tell how reliable the “brain” of the Candy washing machine is. However, it can already be noted that the tracks on the board are well soldered, there are no defects, so nothing should prevent household appliances from working properly for many years.

Reader comments

• Share your opinion - leave a comment