The program on the Indesit washing machine has gone wrong

Indesit washing machines quite often “sin” with erroneous washing modes. This can be explained by the not very reliable firmware of the machine combined with its flimsy electronics. The failure of the Indesit washing machine program is that the favorite modes that the user turns on most often simply do not start, and even if they are set, they get lost during the washing process. Let's look at why this kind of breakdown occurs and what to do in this situation.

The simplest fixes

What to do if the washing program that you constantly run has gone wrong? Firstly, you should not give in to panic, immediately call the service center, invite a technician to repair the equipment, or disassemble the machine yourself.

First of all, you should try to fix the problem by performing a series of simple steps.

You can try to return the washing machine to working capacity:

• rebooting the machine. To begin with, turn off/on using the button; if this does not help, you should unplug the power cord from the outlet and leave the device for 15-20 minutes;
• turning on the test wash;
• by launching the SMA self-diagnosis system.

So, first of all, you should reboot the equipment. First try turning off the machine by pressing the power button. Wait 20 seconds, then start the washing machine. Set the required washing mode. It was not possible to set the desired program, unplug the device from the outlet. Here you will have to wait a little longer - about 15-20 minutes. In some cases, a simple reboot of the washing equipment helps to cope with a failure of the washing mode.

In certain models of Indesit washing machines, test washing modes are programmed. Also, most washing machines are equipped with a self-diagnosis system for emerging problems. The manufacturer has provided these additions so that users can independently identify the cause of the failure. These programs will be able to solve the problem only in 10% of cases, since, after all, their direct purpose is to indicate a breakdown, and not to eliminate the malfunction. However, finding the cause of the problem will also be useful; it will save your time and tell you in which direction to move next. How to set up and run a test? To enter diagnostic mode:

• set the programmer knob to position 1 and press the “On” button;
• move the selector to position 2 and turn off the machine;
• switch the programmer again to position 1, turn on the machine;
• after – to 3 and turn off the SM;
• Set the selector knob to position 1 again and press the start button;
• turn to drain and run a service test.

The pause between switching operations should not be more than 3 seconds. After starting the test, the washing machine will display a fault code. Machines that are not equipped with a display will indicate an error by flashing indicators on the control panel. You can see the interpretation of errors in the user manual supplied with the equipment.

Electronic hardware defects

If the malfunction cannot be eliminated and the mode failure recurs, you need to check the control module and power wiring. First, you will have to disassemble the washing machine by removing the front wall of its body. This is necessary to gain free access to the main electronic unit.When the module is in sight, you should check all the contacts and wires one by one. It is better to start diagnostics with the “On/Off” button. If any element of the board is suspicious, it is advisable to replace it.

When it is not possible to cope with the causes of the malfunction even after such repairs, you will have to check the remaining parts of the automatic washing machine. Perhaps the problem lies in a failed washing element. We'll tell you what to do next.

The failure was caused by a broken part

Very often, failure of the programmed washing mode results from damage to the heating element. The system understands that it will not be possible to heat the water collected in the tank, so it does not start the program. However, in such a situation, a fault code should appear on the display of the washing machine. You can set the machine to work as before by replacing the failed heating element.

If, after dismantling the heating element, you find a layer of scale on it, replace it with a new heater.

A faulty electric motor can cause the program to go wrong. It is recommended to entrust engine diagnostics and repairs to an experienced technician. A professional, after checking the element, will explain whether the motor can be repaired or needs to be replaced.

Another cause of failure could be a failed drain pump. The pump should be checked with a multimeter. If a malfunction of the pump is detected or its contacts with various sensors are broken, the damaged wiring, contacts or the pump sensor itself should be replaced as quickly as possible.

There are several reasons for user program failures on Indesit washing machines. Such a breakdown may indicate either short-term problems in the system, which can be resolved during a reboot, or serious damage to internal elements.You should start with simple ones, gradually moving on to more complex diagnostics.

Reader comments

• Share your opinion - leave a comment