Indesit washing machine freezes during rinsing

If the washing machine works intermittently, it is not always a matter of large-scale breakdown. Often behind the “terrible symptoms” are hidden banal and trivial troubles that any user of the machine can cope with. A striking example of such “deception” is the situation when the Indesit washing machine freezes while rinsing. The hover looks scary, but in reality it turns out that “the beast is not as scary as it is painted.” We will explain in more detail in the article.

Study the symptom carefully

We agree that a car that brakes repeatedly is an alarming symptom. But this is not a reason to panic; on the contrary, if the error is repeated, it is easier to collect data and clarify the manifestations of the malfunction. It is recommended to take a paper and note some points.

At what minute does Indesit freeze? You should notice when the braking occurs - at the beginning of the rinse cycle or at the end, closer to the spin cycle.
How often does the machine freeze: every wash or periodically?
How does the machine behave when stopped: freezes and does not move or periodically turns the drum.
Whether the unit managed to collect water for rinsing or not.
During a stop, does the system respond to user commands or does the rotation of the programmer not respond to the board.

All of the above factors are very important. For an accurate diagnosis, it is recommended to note all the associated nuances. We will tell you below what each symptom indicates and what to do next.

Hang Time

Knowing the time and nature of the machine freezing, it is easy to determine the cause of the problem even without disassembling the case. But first you will have to calculate exactly how many minutes the machine spends on washing, rinsing and spinning.Then it will be easier to determine what is slowing down the system. For example, if braking occurs at the beginning of the cycle, then the filling valve or pressure switch is to blame. In other words, there is a problem with collecting water: the washing machine is either unable to collect enough volume or cannot measure the liquid level. In any case, for safety reasons, the board generates an error signal and stops operation.

Often Indesit freezes when the drum is unbalanced.

If the machine freezes at the end of the rinse just before spinning, then there is a high probability that the drum is overloaded. When the maximum permissible weight of laundry is exceeded or when loading bulky items, the clothes bunch up and an imbalance occurs. The machine, protected from imbalance, automatically stops, since it cannot spin up to the set speed without risk. there is too much laundry in the machine

Also, the machine refuses to spin if the dampers are broken. If the shock absorption system is faulty, then the springs cannot cope with vibration damping due to centrifugal force. As a result, the board detects the failure and automatically turns on standby mode. As a rule, periodic freezing confirms that the drum is overloaded. If braking occurs every cycle, then the shock absorbers are suspect.

Meaning of other symptoms

Now let's look at the remaining nuances. If the machine does not respond to user commands when it freezes, then there are problems with the electronics. It is necessary to check the board for functionality; for this it is better to turn to professionals.

Next we deal with the water supply. When freezing occurs when the drum is empty, you should make sure that the water supply is functioning.If there are no problems with the flow and pressure, check to see if there is a blockage in the inlet valve mesh or in the inlet hose. Often the valve itself is faulty and does not open when the contacts are activated.

It’s bad if a frozen machine stands and doesn’t try to speed up the drum. This indicates serious problems and becomes a reason to contact the service center. When the machine manages to squeeze out a couple of revolutions, you can exhale - most likely, a banal imbalance has arisen. In the latter case, no repairs are required: just stop the cycle, remove some of the laundry from the tank, evenly distribute the remaining items and repeat the start. The Indesit washing machine often freezes during the rinsing stage. The main thing is to soberly assess the situation based on the above “symptoms” and provide adequate “treatment” to the machine.