How to reassemble the stroller after washing?

How to assemble a stroller after washing It is known that disassembling something is much easier than reassembling it. The same situation is observed with baby strollers - parents easily remove covers and textiles, but then do not know how to connect all the parts together. The factory instructions can help in the design. If the booklet is lost and you can’t find information on the Internet, you’ll have to figure out how to assemble it yourself. Let’s look at how the main types of “baby” strollers are “mounted”.

Stroller for walking: general recommendations

After the upholstery, covers, and mattress have dried, parents begin to reunite the disassembled parts of the children's “transport.” It is important that all the parts fit neatly into place; the structure should not “wobble” or play. How to properly assemble a stroller after washing? Where is the best place to start?

First of all, you should work with the base. The cover is pulled over the back and seat. Afterwards the textiles are fixed to the armrests and the hood is fixed. Then you can get to work on the belts - thread them through the special holes and bring them into place. It is important to take your time and assemble the “walk” gradually and carefully.

Often parents are faced with the fact that after assembly there are gaps between the upholstery of the stroller elements. If this is the case, it means the covers were not secured correctly. Check that the textile is tightly stretched and that all latches, hooks and buttons are in place.

Transformable stroller

The transformer is a real all-terrain vehicle, in which the child can “travel” reliably and comfortably. They are multifunctional, passable, and have a spacious sleeping area.These models of baby strollers have their own characteristics, so assembly may cause some difficulties.

Before you begin assembly, be sure to make sure that all the main structural elements are present.

To check that all parts of the structure are in place, read the instructions for the stroller. All the main elements of the configuration are listed there. transformable stroller assembly

When assembling a transformer, be sure to:

all mechanisms functioned properly, textiles and seat belts did not interfere with this;
There were no gaps between the upholstery parts. There should be no holes; their presence indicates that the structure was assembled incorrectly.

Here, as in the case of a walk, you should first pull the covers onto the base, then work on the side walls and the visor. To avoid confusion, you can videotape the process of removing the upholstery. Then there will be no difficulties with assembly.

Multifunctional strollers

Removing upholstery from 2-in-1 or 3-in-1 designs is quite difficult. It is even more difficult to pull the textile back. But since multifunctional strollers are very convenient for mother and baby, the demand for them is high, which means that parents often face the problem of assembling after washing.

If we talk about 3-in-1 strollers, the easiest thing to do here is to remove and wash the car seat cover. You will have to tinker with the cradle for babies longer. It is even more difficult to pull off and put the upholstery back on the walking block. Sometimes even instructions do not help to secure textiles correctly. The main problem in this case is seat belts.

The more complex the design, the more difficult it will be to assemble. Therefore, a video camera or camera can become your faithful assistant. When removing upholstery elements, it is better not only to remember the sequence of actions yourself, but also to record the process on camera. It’s even better to find the instructions and understand the mechanism for attaching the stroller parts.

It is important to follow the recommendations for washing the upholstery of children's "transport". You need to make sure that it does not become deformed, otherwise reassembling will become even more difficult. If possible, it is better to dry clean the stroller.