Where are the transport bolts of the Zanussi washing machine?
It is important not to forget to remove the transport bolts from it before installing and using the washing machine. They are designed to secure the tank so that the unit is not damaged during transportation. If you forget to remove the screws, you can ruin the machine the first time you start it up. To remove the fasteners, you need to understand where the transport bolts are located. Let's figure out which side to look for them from, how to properly pull them out of the case.
Purpose of these fasteners
Each type of household appliance has its own transportation recommendations. For example, a cardboard box with soft inserts is enough to transport a refrigerator. But in order to deliver the automatic machine safe and sound, shipping bolts are required.
The tank of the Zanussi washing machine, together with the drum, are almost weightless. The assembly is supported only by the shaft and shock-absorbing elements: springs and dampers. Due to this “structure”, the machines suppress vibration during operation. But because of this design feature, certain difficulties arise when transporting the washing machine.
If you drive a Zanussi washing machine along a road with “potholes”, the equipment will begin to “bounce”, as a result of which the loose tank will begin to hit the body, damaging both itself and the rest of the “insides” of the washing machine. Transport bolts secure the tank and prevent it from “dangling” during transportation, touching the motor, housing and other parts.
Shipping bolts ensure safe delivery of the washing machine and protect the machine from damage.
Typical Zanussi washing machine transport screws consist of an elongated metal rod with a cap, a rubber seal and a tip. Let's figure out where to look for bolts.
Are bolts difficult to find?
Washing machines of different brands have transport bolts located in one place. It's easy to find them. It all depends on the type of machine:
- for front-facing cameras - on the rear wall of the case;
- for “verticals” - on the side wall or rear panel.
The instructions for the Zanussi washing machine provide information on the number and location of the retaining bolts and describe the algorithm for their dismantling.
Therefore, first of all, you should look at the user manual. Then there will be no need to carefully inspect the case, trying to find the screws. The instructions contain a whole section for a description of the transport bolts and the process of dismantling them. You should carefully study the explanations to avoid mistakes during removal.
How to unscrew it correctly?
When the machine is brought from the store, you must let it “rest” at room temperature for a couple of hours. During this time, you can study the instructions for the equipment, become familiar with the rules for installing the equipment and connecting it to home communications. Learn how to properly remove shipping bolts.
The algorithm of actions after delivery of the washing machine from the store should be as follows:
- release the machine from its packaging;
- let the machine “settle” for 2-3 hours;
- remove all factory stickers from the case;
- drag the equipment to the installation location.
The transport bolts can now be removed. For this:
- take a special key (it comes with the Zanussi washing machine);
- loosen each of the bolts by unscrewing them 3-4 cm;
- push the screws inwards one by one until the metal hits an obstacle;
- remove the rubber seals and tip;
- Insert the plugs that come with the washer into the holes.
Once you've finished dismantling, don't rush to throw away the screws. It is better to put them away for storage along with the manual booklet, warranty receipt and other documents. Transport bolts may always be needed to transport equipment.
Transporting your Zanussi washing machine with the drum unsecured can cause serious damage to the equipment.
The screws were accidentally left behind
It happens that users are so happy with their new “home assistant” that they completely forget about the need to remove the transport bolts. They install the machine, activate the first cycle, and see that the machine is working somehow wrong. It is strictly forbidden to run a washing machine with fasteners inside.
If you turn on the washing program and forget to remove the bolts, serious damage will be caused to the machine. The motor will start working and will try to spin the drum, which will remain secured with clamps. First, the shock-absorbing elements will be negatively affected, then the shaft will deform and the bearing assembly will fail.
The tank will hit the “insides” of the machine, damaging not only the body, but also some parts. The longer the washer operates with the transport bolts not removed, the more damage it will suffer.
Once you realize that your Zanussi washing machine is running with the transit bolts installed, you should complete the cycle as soon as possible.
A machine with retaining fasteners does not operate properly. Will be noted:
- excessive vibration of the housing;
- “bouncing” and moving the washing machine around the room;
- unnatural grinding, creaking and humming.
Having realized that the machine is running and the transport bolts have not been removed, you must immediately stop the cycle by pressing the “Stop” button and unplugging the power cord from the outlet. Afterwards, be sure to call a washing equipment repair specialist. A specialist will assess how badly the washer is damaged and what repairs will be needed.
With the most rosy outcome, the user will only get away with fear. A slightly less unpleasant situation is when you have to change the springs and dampers. In the worst case, the washing machine may be completely unsuitable for further use if the body, tank, motor and other elements are damaged. Equipment breakdown due to untimely dismantling of transport bolts is not considered a warranty case. Therefore, the owner of the automatic car will have to pay for the repairs himself.
Interesting:
2 reader comments
Add a comment
Categories
Washing machine repair
For buyers
For users
Dishwasher
Thank you. Everything is clear and accessible, but where to find the bolts? The car is not new.
Hello. I have the same situation.