How to remove the powder tray from the Ardo washing machine?

How to remove the powder tray from an Ardo washing machine It is difficult to find a housewife who could not remove the powder container from the washing machine. There is usually a special tab in the center of the tray that covers the rinse aid compartment. If you press on it while simultaneously pulling the container towards you, the latter can be removed without difficulty. Most units have a container designed this way, but Ardo washing machines have a completely different design.

How to remove a box from Ardo?

Many users always prefer the empirical route to reading instructions. Therefore, attempts to get the Ardo tray are often accompanied by “tearing out the roots” of the entire mechanism. And those who pick up technical documentation are confused by the complex and incomprehensible language.

Imagine that you recently purchased an Ardo washing machine, used it for a couple of weeks, and then decided to remove and rinse the powder container. Accordingly, the container structure does not suffer any damage. How to get the tray out correctly?

Pull the compartment towards you so that it comes out as far as possible.
Inspect the bottom of the tray from below - on the sides you will see small teeth that prevent the container from being removed.
Lubricate the plastic restrictor teeth with any vegetable oil to improve their mobility.
Grab the body of the container (not the handle!) and carefully lift it up, pulling it towards you, after which it will move a few millimeters.
The previous manipulation helped you get through the two right cloves, but the container was not completely removed.
Now we press on the container from above, it moves down with a click.

Note! The container comes out at a slight angle, continue to press and pull it with force toward you, so you can remove the tray completely.

On some Ardo models you can see the inscription PUSH on the softener tray. In this case, just open the detergent compartment and press the inscription. At the same time, pull the tray outward and it will easily pop out. Do not remove the container while the machine is operating, otherwise all the incoming water will spill out. Be careful: even if the equipment is not working, the container may be filled with liquid and powder residues. Therefore, prepare a flat bowl or rag in advance. Before the procedure, turn off the power to the machine by disconnecting the power cord from the mains. soak the powder tray

You can wash the container physically - with a small soft brush, or chemically - using complex detergents to clean the washing machine. In the latter case, the product is poured into the main wash compartment. Then run the machine in 90 degree mode with repeated rinsing. Using the same method, you can remove the powder container from Indesit machines. The internal structure of the trays is identical for both brands. By the way, both brands are of Italian origin.

How to make it easier to extract an element?

If you managed to remove and clean the tray, do not rush to put it back. During secondary extraction, repeating the procedure will be much more difficult. What needs to be done to ensure that the container of the Ardo washing machine can be removed without effort?

Washing machine repair technicians and knowledgeable consumers recommend using sandpaper or a mini file to carefully sharpen the teeth. Approximately one millimeter of plastic should be removed. This will greatly facilitate manipulation in the future and prevent the tray from spontaneously popping out during operation. To remove the container on any unit, it is enough to have some skill. Over time, the procedure reaches the level of automation. The user does not even remember the initial difficulties.