How to seal the tank of an Indesit washing machine?

In some cases, when repairing a washing machine, you have to cut the plastic tub to restore components or replace a bearing. What to do in this case and what is the right thing to do, and most importantly, how to glue the tank of an Indesit washing machine. After gluing, the tank should fully perform its functions and turn into a waterproof monolith. To do this, you need not only to choose the right sealant, but also to know how to reliably glue surfaces. In this article we will try to understand the intricacies of gluing a plastic tank.

The best compositions for gluing the tank

When choosing silicone sealant, you should remember that the unit will be operated under aggressive conditions. This is not only a sharp change in temperature and exposure to detergents, but also the occurrence of vibration during certain stages of washing. In stores there is a large selection of glues and sealants that meet the necessary requirements.

Permatex 81730. This is a special sealant that is designed for gluing car headlights and glass. For this reason, the properties were calculated for use in aggressive environments. In this case, this silicone sealant is suitable for sealing the plastic tub of a washing machine. The cost of a 42 gram tube is three dollars, but keep in mind that gluing will take the entire tube. We recommend taking an extra tube so you don't have to go to the store if you don't have enough.

Kraftool. According to the characteristics, this silicone sealant is characterized by maintaining properties at high temperatures (withstands up to 250 degrees), and the ability to work in vibration conditions.Initially created for the repair of pumps, engines and other components. After using glue, the plastic tank perfectly performs the necessary functions. It does not require the use of bolts to create a strong connection. The cost of a tube is four dollars, but in ordinary cases it is enough to glue three or four tanks. Experts often use this glue to achieve a strong connection.

Its composition is not silicone sealant, but polyurethane adhesive. When used, you can glue the halves of the tank or drum almost tightly. After two to three hours, the seam completely hardens, and it will no longer be possible to separate the halves. The cost of glue is 11-12 dollars per 310 ml bottle.

When using it, remember that during the next repair it will not be possible to disassemble the connection; you will have to saw the tank.

ABRO 11AB-R. An excellent sealant that is suitable for bonding individual parts operating under harsh conditions. Withstands high temperatures, resistant to chemical and mechanical stress. After use, the seam is completely sealed. The cost is about six dollars for an 85-gram tube.

How to ensure the strength of the connection?

By making non-separable units, manufacturers of Indesit washing machines cause a lot of trouble for craftsmen. If the unit breaks down or the bearing needs to be replaced, it is recommended to replace the entire unit. For European countries, this option is suitable, but in the conditions of our country, craftsmen will try to disassemble and repair even non-demountable structures. In any case, such repairs will require less expense than a complete replacement.

In some cases, to carry out repairs it is necessary to cut the tank, and only if this condition is met can you get to the required unit. After repair, it is necessary to restore the tightness of the container. For gluing plastic, the first thing that comes to mind is a sealant. But he is not always able to cope with the demands placed on him. For this reason, craftsmen have to connect the halves with bolts and nuts, and seal the gap with sealant.

In case of gluing, it is not recommended to skimp on glue and use cheap analogues. Repeated disassembly and repair of leaks may be more expensive than using a quality adhesive material.

How should I glue it?

For the correct subsequent gluing of the cut tank, some manipulations should be performed, which will further help ensure the accuracy of gluing. Before sawing, we recommend making several holes along the seam with a small drill. After making repairs and connecting the halves, the holes made will help to correctly connect the cut parts.

Whatever glue is used for repairs, we recommend connecting the halves using bolts and nuts. When using additional fastening, it is not necessary to wait for the sealant to dry. After complete assembly, you need to wait a few hours until the sealant dries, and you can turn on the washing machine and start the wash.

After carrying out this type of repair, it is impossible to give a full guarantee for the glued tank, and that it will be restored and will not leak. If you follow the recommendations presented and use high-quality materials, then the risk of a leak approaches a minimum.

Reader comments

• Share your opinion - leave a comment