Where to put the powder in the Ariston washing machine?

Where to put the powder in the Ariston washing machine It was not for nothing that washing machine manufacturers came up with and implemented such an element as a powder receptacle or loading tray. Thanks to it, the detergent enters the drum in a dosed manner, which increases washing efficiency and protects items from discoloration. Trays come in different shapes and have an excellent number of compartments, so not everyone knows where to pour powder in an Ariston washing machine. We suggest you sort out the problem so as not to get confused and make mistakes.

Identifying the powder receptacle compartments

It is rare to find identical dispensaries even from the same manufacturer. So, on Ariston machines, semicircular powder receivers are mainly installed, but sometimes there are rectangular variations. But regardless of the shape, each drawer is always divided into three sections. Markings will help you understand which compartment of the tray the powder is poured into, and where it is better to pour the stain remover.

The symbols “A”, “I” or “1” mark the pre-wash section. Powder is poured here only in cases when the corresponding program is launched. Then the product from the first cell goes for soaking or primary washing, and then the main cycle begins with withdrawal from another compartment. If you don’t add anything, the laundry will spin in clean water.
The icons “B”, “C”, “2” or “II” indicate the compartment for the main wash. As a rule, it is larger than the two neighboring ones. Detergent is added here during any cycle.
The symbol “*” or a schematic image of a flower marks the compartment for additional liquid products - conditioner, stain remover, bleach, water softener or rinse aid.More often than not, this cell on Ariston is the smallest and is located between the cells for the main and pre-wash.

Knowing the markings, it is not difficult to determine the purpose of each compartment of the tray. It will also help that in semicircular dispensaries in Ariston machines, the cell for the main wash is located on the right.

Compartment markings are not visible

It is more difficult to understand the powder dispenser if there is no marking. This happens if the machine has been used for a long time, and the factory designation has become erased over time. But this does not mean that you need to randomly pour powder into the cells of the dispensary. It is much more convenient and effective to conduct a small test. identify the compartments

To determine which compartment of the tray you need to add powder to during the main wash, you need to open the powder receptacle at the very start. This action will not affect the operation of the machine in any way, the main thing is to close the door tightly and start the standard or fast mode. We wait until water flows into the dispensary - the first washed cell can be marked as “2” or “B”.

With a standard washing program, water is first supplied to compartment “2”, with a preliminary wash program – to compartment “1”.

Continuing the test, select the pre-wash program and wait for the water to fill. In this mode, compartment “1” or “A” will be washed first. Having eliminated two of the three, we “calculate” the cell intended for conditioner or stain remover.”

Can I pour it into a drum?

Many housewives “boycott” the powder receptacle by adding detergent directly into the drum. The reason for this behavior is that when using the washing machine for a long time, the tray becomes dirty due to completely insoluble powder. As a result, deposits remain on the walls, which clog nozzles and pipes, preventing soapy water from penetrating to things, worsening the quality of washing.

But washing machine manufacturers, including Ariston, strongly do not recommend abandoning the loading tray. There are several reasons for this:

pouring into the drum makes it difficult to completely dissolve the detergent, which causes light stains to appear on clothes;
The product is not dosed, it washes out faster and washes worse.

Now, in order. During washing, powder granules “stick” to the item and dissolve in one place, which inevitably leads to the appearance of faded spots on black and colored items. The situation is similar with gels, which, when they come into contact with fabric, are immediately absorbed and begin to corrode the dye.

As a result, drips and stains appear on the material, and the clothes themselves are not washed. Many housewives try to outwit the system by adding product to an empty drum. It is believed that through the holes at the bottom the powder will enter the tank and there will dissolve in the water without damaging the laundry. But it is worth remembering that when the cycle starts, the pump automatically pumps out the old liquid into the sewer, and along with it some of the soap. Naturally, the proportions will be disrupted, and complete washing will be at risk.

The tray must be washed regularly to avoid solidification of undissolved powder!

The quality of washing will also suffer due to the impossibility of gradually withdrawing the product from the tray. But there is a way out - place the powder or gel inside a special container. We are talking about a plastic jar with small holes in the walls, which ensures gradual leaching of soap from the container. Ideally, you should have several of these dispensers to wash with conditioner.

Modern capsules instead of powder

If you refuse a powder receiver, the real salvation will be special washing capsules. Thanks to them, you can add detergent directly to the Ariston drum without risking your clothes and the quality of washing. A similar effect is ensured by a shell that dissolves in water, under which there is a concentrated gel. As a result, the concentrate in the required quantity reaches things without leaving stains or streaks on them. use capsules

For washing to be high-quality and safe, you need to know how much powder you need and where to add it. Otherwise, things will be damaged or not washed.