Canceling a wash in a Samsung washing machine

Canceling a wash in a Samsung washing machineIf necessary, you can forcibly cancel washing in a Samsung washing machine and stop the cycle at any point. The only problem is that when forced to stop, the machine will not unlock the door, but will “freeze” waiting for further action. What to do next depends on the task assigned to the housewife. But for this you will have to consider all possible options with instructions and recommendations.

Step-by-step instruction

If you urgently need to get things out of the machine, then one stop will not be enough. After canceling the wash, it is necessary to drain the water, unlock the door and only then enter the drum. In step-by-step instructions it looks like this:

  • find the “Start/Stop” button on the dashboard;
  • after waiting for the stop, press the “Drain” button;
  • wait 1-2 minutes required to empty the drum;
  • At the end of the program, open the hatch and take out the laundry.

On a Samsung washing machine, the hatch is automatically locked 3-4 minutes after the end of the drain program.

Some Samsung models do not have a separate “Drain” button. In this case, you must first turn on “Spin”, and after 1-2 minutes adjust the command to the “No spin” position. There is no contradiction - Korean technology will “understand” that you only need to empty the drum.activate drain

If the program was selected by mistake and now you need to switch to another mode, then the action is much easier. Just hold down “Start/Stop” and then press the appropriate button. There is no need to drain the water - the system will automatically perform all the required actions.

Difficulties arise when the Start/Stop button does not work.In this case, it is necessary to find out the reasons for the “sticking”. First of all, we check whether the child lock is turned on. A locked dashboard will not respond to user commands. The security option is disabled in different ways: the combination depends on the existing model (there is a smiling padlock on the module, next to the locking keys). As a rule, you need to simultaneously press “Temperature” and “Rinse” or “Rinse” and “Spin”.

Do not open the hatch unless the water has been drained from the drum!

If the panel lock is disabled and the buttons do not work, then there is likely a problem with the control board. With a full tank, the malfunction cannot be eliminated, so we unplug the plug from the socket and wait for the hatch to automatically unlock for 4-5 minutes. After the UBL is activated, you will have to drain the water from the drum manually. To do this, we find a technical hatch in the lower right part of the case, open it with a flat screwdriver and unscrew the garbage filter. Be prepared for waste water to pour out of the hole.

Emergency situations

Emergency situations often force you to cancel the washing cycle. So, the machine stops washing if there is a sudden power outage. In this case, you just need to wait - modern Samsung can remember the stopping place and continue the cycle in a given mode when the electricity is turned on.

Pulling the plug of a running washing machine from the socket is allowed only in extreme cases - the system reacts sharply to voltage changes!

If the machine freezes and does not respond to user commands, it is better to unplug the unit from the outlet and restart it after 15-20 minutes. Rebooting the system resets the wash, after which control can be restored. When it freezes again, you should complete the cycle and call a service center specialist.turn off the power to the washing machine

In situations where it is necessary to urgently leave the apartment, it is also recommended to forcefully end the cycle. Leaving washing machines running unattended is extremely dangerous - the machine may catch fire or leak. Therefore, we don’t take risks; before leaving, press “Start/Stop” and wait for the machine to stop completely for 5-10 minutes.

   

1 reader comment

  1. Gravatar Ilya Ilya:

    Samsung. In the cotton program, it sets the washing time itself. And it doesn’t matter how much laundry is included - 4 or 6 kg. After 10 minutes of operation, it switches from 1 hour 27 minutes to 2 hours 40 minutes. How can I cancel this?

Add a comment

We recommend reading

Washing machine error codes