How to reset a Beko washing machine program?

Often when using a Beko front washing machine, it becomes necessary to reset the program. The problem arises for a number of reasons - people “realize” that they forgot an important thing in their laundry, make a mistake in choosing a washing cycle, or want to add more clothes to the wash. In these cases, do you need to reset the Beko washing machine program? Can this be done, and if so, how?

Stopping the program correctly

The easiest way would be to restart the system. However, it is advisable to use this technique only if the equipment has frozen and stopped responding to commands. An emergency reboot can cause problems with electronics. That is, it is better to find a more gentle way. A safe reset can be done like this.

• The “Start” key is pressed for 4 seconds.
• The indicators located on the control panel should be activated - the light will turn green, then they will go out.
• The wash should stop.
• If the washing machine is an old model, you will have to put the selector in the neutral position.

After successful manipulations, the machine “calms down”. At the same time, the lights flash and go out. If nothing like this happens, there is a malfunction, and the system signals an error. This means you will have to reboot. It is done correctly like this.

• The selector is placed in the first position.
• Then press the “Stop/Start” button – hold it for 5 seconds.
• The machine is disconnected from the power supply.
• Then it is plugged back into the network and the washing is started.
• If the equipment refuses to work when you press the “Start” button, the cord should be immediately unplugged from the outlet.

Important! If equipment is abruptly disconnected from the power supply, there is a risk of damage to electronic systems!

Water prevents the door from opening

You should only reboot the system in desperate situations. If something valuable was forgotten in your clothing pockets, you will need to quickly stop the washing process, open the hatch and remove the water. All these actions should be taken immediately, otherwise the item may be damaged.

Important! Water and soap heated to 45 degrees or higher can damage microchips and oxidize microcircuits.

To remove contents from a drum filled with water, do the following.

1. The washing cycle needs to be stopped - the “Start” button is pressed, the lights on the control panel go out.
2. The selector should be placed in the neutral position.
3. Afterwards, you need to activate the “Drain without spin” or “Drain only” mode.
4. Next, click the “Start” button.

The washing machine should then stop. The water will drain and the hatch will be unlocked. If the drainage does not take place, you will have to do the following - twist the “trash can” (filter element). It is located behind a small door at the bottom of the case.

You can remove it by unscrewing the part counterclockwise. It is worth remembering that up to 1 bucket of water can be drained. This means you need to prepare a container and rags.

To summarize, resetting the program in the Beko washing machine should be carried out according to the rules. An emergency reboot can lead to a number of problems, but if you cannot stop the equipment otherwise, you can use it. However, there is no guarantee that the machine will behave as before; it may even need repairs.

Reader comments

• Share your opinion - leave a comment