How to remove the top cover of an Ariston washing machine?

To fix almost any breakdown, you will have to remove the top cover of the Ariston washing machine. The work takes no more than 10 minutes, but a novice master may have some questions during the process. We'll tell you how to partially disassemble the washing machine body yourself, at home.

Unexpected difficulties

Most washing machines do not have problems with removing the top panel - you can easily remove it without much effort. On Hotpoint Ariston machines, the lid is additionally secured with molded latches. Plastic fasteners are very easy to break during disassembly, so the work is considered quite risky.

When removing the top panel, do not allow the latches to break off, otherwise it will not be possible to replace the cover.

It is also important not to forget about safety rules. Before attempting to open the cover, you should turn off the washing machine from the mains, and also close the shut-off valve. Only after such preparation can you begin to disassemble the case.

Removing an element on a front-loading machine

The algorithm of actions will depend on the type of automatic washing machine. Front-loading models are in great demand, so let's start with them. The front door cover is additionally secured with plastic molded fasteners, which is important not to forget about. To remove the cover, the user must:

• find two bolts holding the top panel;
• Unscrew the screws using a screwdriver or screwdriver;
• walk around the machine, lift the back of the panel and carefully pull it in your direction until the plastic clips engage.

Do not pry the cover with a knife or slotted screwdriver - this will lead to breakage of the latches.

This is how you can open the lid on Ariston washing machines. If the “top” does not budge, you should change your tactics: stand in front, lightly press the element and push the panel towards the rear wall of the case.

The main mistake made by home craftsmen is trying to “stir” the lid by prying it off with a knife or screwdriver. This will not make removal any easier, but it can lead to dire consequences. With such intervention, the plastic latches often break, and then it will not be possible to put the case back together.

When removing the “top” from the Hotpoint Ariston washing machine, the main thing is not to violate the instructions for action. The screwdriver should only be used to unscrew the bolts; it is strictly prohibited to pry the cover off with it.

Removing the “vertical” cover

It is more difficult to remove an element on top-loading Ariston machines. If the laundry hatch is located on top, then when partially disassembling the washing machine, it is necessary to remove not only the lid, but also the control panel. In order not to do unnecessary work, you should first clearly define the purpose of intervention in the machine.

If for repairs it is necessary to “crawl” specifically to the hatch door, then you can unscrew only a couple of fasteners. When you need to get deeper, you will have to remove the dashboard. To carry out a partial analysis of the “vertical” Hotpoint Ariston, you should:

• Unscrew the bolts located at the back, directly under the control panel, on both sides of the machine;
• tilt the dashboard slightly forward;
• remove the cover by unfastening the module from the machine body;
• Unscrew the screws that secure the “top” (they are located under the dashboard);
• remove the cover.

It is quite possible to do it yourself with disassembling the SMA Hotpoint Ariston case with your own hands, regardless of whether it is “front-mounted” or “vertical”. To open the lid, you should strictly follow the instructions and do not try to outsmart the system. It is also important to follow safety rules when working with electrical appliances.

Reader comments

• Share your opinion - leave a comment