Dryer won't stop

The lack of knowledge about the operating features of dryers raises many questions among users who have only recently purchased this equipment. For example, some people complain that their dryer does not stop while drying. In today's article we will look at why a device can behave this way and what to do about it.

Why not a full stop?

When studying the operation of dryers, many users constantly compare them with washing machines, because they are very similar in appearance. However, this opinion is erroneous. Owners of equipment expect that during the entire cycle it will work as actively as a washing machine, and at the end of the process it will give a characteristic signal, but in reality everything is different. About an hour before the end of the program, the dryer runs very slowly. The drum rotates rarely and in different directions, which creates the impression that the device is completely frozen.

When the active drying stage is complete, the Smoothing process takes effect, lasting from 15 minutes to an hour depending on the moisture level of the contents. At this time, the drum rotates reversely, which ensures uniform smoothing of the laundry. The Finish/Smooth light on the control panel illuminates to let you know the machine has completed the drying cycle. Depending on the type of laundry, you can either turn off the machine and iron the clothes, or wait for the ironing process to finish and immediately put the clothes in the closet.

It also happens that the dryer continues to work, although the cycle time has already passed.In this case, you need to unplug the equipment and remove all the laundry from the drum. The reasons for such continuous activity of the apparatus vary. These include:

• reduction of air flow;
• no heating;
• incorrect operation of the humidity sensor.

If the drying unit has had its filters cleaned and condensation removed, but it still does not complete the program and stops, you need to contact a service center!

One of the most common reasons why a dryer won't stop is a faulty timer or humidity sensor. When these devices do not work properly, the machine does not recognize whether the laundry is dry and continues to operate. In this case, it is necessary to check the condition of the timer and sensor and, if necessary, replace them.

Another possible cause could be a clogged ventilation system. If the vents are clogged with dust or other contaminants, air will not circulate properly and will cause the dryer to continue to operate. In this situation, it is extremely important to clean the ventilation in order to ensure normal functioning of the “home assistant”.

Failures that prevent the dryer from completing the program

As you already understood, if the drying program lasts longer than usual, or the equipment does not stop at all, this is the first sign of a malfunction. It is impossible to specifically determine the problem without testing, but we will bring to your attention several possible reasons for its occurrence.

• Clogged pipes and filters. They are the real bane of your dryer. In order for your equipment to work properly, it is necessary to clean the filter, pipes and heat exchanger in a timely manner. If you find that the device suddenly increases the execution time of the program, and then stops turning it off altogether, then the problem lies precisely in the blockage.
• Software error. It usually appears due to a faulty control board or some short-term system failure. First, try simply unplugging the device from the power supply and plugging it in again after 10 minutes. If the problem persists, contact a specialist.
• The temperature sensor has failed. This element regulates the temperature inside the device and ensures that it does not overheat and the laundry is dried properly. The first sign of a problem is the fact that the dryer continues to run even when it should be turned off.
• The locking device is broken. The lock that is responsible for locking the hatch door may burn out or turn off if the chip with the wires is disconnected. The main symptom is the endless execution of the program. In this case, the locking device will need to be tested and replaced if necessary.

Problems can be caused by various reasons, and methods of solving them depend on the specific situation. In order to avoid such problems, it is necessary to carry out timely diagnostics and regularly clean the dryer. This will extend its service life and ensure that the “home assistant” continues to work effectively for you.

Reader comments

• Share your opinion - leave a comment