How to turn on a Weissgauff dishwasher and start the wash

How to turn on a Weissgauff dishwasher and start the wash Any dishwasher is designed to wash a mountain of dirty dishes in a matter of hours. However, if you use the equipment incorrectly, ignoring the manufacturer’s instructions and expert recommendations, then this resource can be seriously reduced. To prevent this from happening, read our manual before turning on your Weissgauff dishwasher and starting to actively use it.

Putting the PMM into operation

Equipment from the famous Weissgauff brand is distinguished by its quality and ease of use. Therefore, starting a car wash on this PMM is elementary.

Connect the device to all communications.
Open the water supply valve.
Add dirty dishes to baskets.
Check the salt, detergent and rinse aid in the special compartments.
Select a mode and start washing.

If you forgot to add some dishes, or simply made a mistake with the choice of operating mode, then in the first minutes of the working cycle you can open the PMM door, load the remaining dishes, or change the mode, and then close the door again so that the machine continues washing.

Thus, any turning on of the dishwasher takes no more than 5 minutes of your time.

Weissgauff PMM modes

The more expensive the device, the more additional functions and settings it has. The following programs are considered classic washing modes:

Standard sink suitable for everyday use;
Intensive washing is the choice for the dirtiest dishes, including those with burnt food and congealed fat;
A delicate wash is needed for fragile glasses that usually do not have serious dirt on them;
“Hour” – fast working cycle without drying to wash minimal dirt;
Soaking is a preliminary procedure before the main working cycle, necessary for maximum contamination;
The eco-wash was created for items made of fragile materials, such as porcelain and crystal.

Before purchasing a PMM, be sure to study the characteristics and set of modes in order to weed out unnecessary programs and not overpay for them.

Where and how to place dirty items?

To run the sink, you must first properly fill the dish baskets. Most often there are two of them - upper and lower, but sometimes there is an additional compartment for small cutlery. How to load them correctly?

The upper basket is suitable for small and lightly soiled items, such as cups, small plates, saucers and others.
The lower basket is needed for large and very dirty items, such as pots, baking trays and frying pans.
Install all items so that there is free space between them for water circulation.
Place deep objects upside down so that water does not accumulate in them, but drains away immediately.
Make sure that the dishes do not interfere with the free movement of the spray arms.
Do not put wood, pewter or copper items in the dishwasher. Also be very careful with crystal and porcelain, the dishes from which should not touch each other to avoid cracks and chips.

By following all these recommendations, you will never encounter a situation where the dishes remain dirty and stained after washing.

Products for PMM Weissgauff

We figured out the correct arrangement of dishes, all that remains is to load the detergents. In total, three types of tools should be downloaded for the normal functioning of the device:

special salt;
detergent;
rinse aid

The first should be added to combat hard tap water. If you have poor quality water in your city, then you need to find a salt bin at the bottom of the PMM washing chamber, pour about a liter of water into it, and then add a kilogram of salt. It is recommended to use only a specialized product, since ordinary table salt is too fine and poorly purified, and therefore does not restore the regenerating properties of the ion exchanger that softens the water.

Data on hardness can be found on the official portal of the city water utility, where company representatives are required to publish information on the quality of tap water in a timely manner.

Now all that's left is detergent and rinse aid. The first comes in the form of gel, powder and tablets, which has a greater impact on price and ease of use. Buy the type of chemicals that you like best, but only those created specifically for washing dishes in a PMM, and not for hand washing. Rinse aid should be added so that the dishes will delight you with their bright shine after each working cycle. Place detergent and rinse aid in separate compartments located on the machine door.

Prevention of PMM

Finally, let’s look at the rules for caring for a “home assistant.” They are very easy to follow, and the positive effects from them exceed all expectations.

After each cycle, leave the machine door open to prevent the formation of mold and unpleasant odors.
Always wipe the washing chamber dry with a dry cloth.
Remove food and dirt from the dust filter and behind the rubber door seals. The first one can be washed with tap water, and the second one can be simply wiped with a cloth.
Rinse dish baskets and spray arms occasionally to keep them free of dirt.
Once every three months, perform an idle start with the purchased cleaner - a special product that can remove any dirt and blockages from the most inaccessible places of the PMM.

This completes the list of recommendations for turning on and using the dishwasher. Save this article so you don’t lose important tips and always maintain your equipment perfectly.