How to turn on the Vyatka washing machine?

How to turn on the washing machine Vyatka Turning on the Vyatka automatic washing machine immediately after purchase is a bad idea. Before starting the equipment, you must read the instructions and prepare the machine for washing by performing several important procedures. Otherwise, the unit will either wash worse or break. To ensure that the first launch goes without surprises and troubles, you should act in a certain sequence. We’ll look at what to do and how to do it in detail.

Is the equipment prepared for use?

Before you start washing, it’s worth diving into the theory - studying the user manual. The instructions supplied with the machine must contain the operating rules for the washing machine, features of its installation and connection to the electrical network. The documentation also provides a description of the dashboard icons and a description of the main and additional programs and functions. Next, you need to prepare the machine for washing. We are talking about the following events:

let the car “settle” for 2-3 hours at room temperature (especially if the equipment was transported in the cold season);
adjust the position of the washing machine body;
bring and connect communications;
remove the transport bolts;
clean the drum;
remove factory stickers.

Let's look at each point separately. It is advisable not to connect a newly purchased machine to the power supply after transportation. It is necessary that all structural elements “get used” to the new environment, especially if transportation was carried out at low temperatures. Rubber components, motor and wiring must “warm up” and restore their performance characteristics. unscrew the transport bolts

The second step is installing the machine. Ideally, the installation of the washing machine is carried out by specialists: it is important to correctly adjust the position of the machine, level the body, and also tighten the clamps on the hoses. Otherwise, the equipment will “jump” around the room and threaten to leak.

The next step is to remove the transport bolts. They are elongated bolts that secure the washing tub in a stationary position during transportation. This way the container is protected from loosening and damage. But it is prohibited to start the washing machine without dismantling them: attempts by the engine to spin the attached drum will lead to damage to the cylinder, bearing assembly, shock absorbers and the motor itself.

Washing with the transport bolts not removed is not considered a warranty case - the consumer pays for the repair out of his own pocket.

Removing the shipping bolts is easy:

the number and location of bolts on a specific Vyatka model is specified;
fasteners are weakened;
the rods are pushed in until they stop;
The holes that appear are closed with the supplied plugs.

Be sure to look at the “cleanliness” of the washing machine. All factory stickers and tape are removed from the case. You should also remove the plastic ties and foam frame. We pay special attention to the drum - additional components are often stored in it. After “cleaning” the machine is wiped with a dry cloth.

The washing machine is now ready to start. But it’s too early to put laundry in the drum - first the machine should be “run” idle. How to do this correctly is described below.

Test run

After studying the instructions and preparing the machine, we proceed to the technical launch. This means a “idle” cycle – washing without laundry.This solves three problems at once:

Factory grease and dirt are washed off;
the “chemical” smell characteristic of new equipment is removed;
The washing machine is checked for serviceability (whether the unit is working, whether the pump pumps out water, how the machine makes noise and vibrates).

The first wash is carried out strictly without laundry. Otherwise, the washable technical lubricant will remain on the fabric and things will be damaged. What’s worse, due to a manufacturing defect, you will have to stop the cycle and return the equipment, leaving behind wet and dirty things.

First, Vyatka is launched without laundry, but with detergent.

Detergent must be added in order to better rinse the internal elements of the equipment. Add regular powder or special cleaner to the drum or dispenser. The machine starts as standard: insert the plug into the socket, turn on the water supply and press the “Start” button. If the Vyatka model does not have a start key, then turn the selector to the desired position.

When starting up for the first time, you cannot go far from the machine - you need to control the behavior of the washing machine. If increased vibration, leakage or a suspicious hum is noticed, it means that the equipment has a manufacturing defect. You need to forcefully stop the cycle and contact service.

Setting up and starting the machine

For the technical cycle, any high-temperature mode is suitable - “Cotton” or “60”. For subsequent washes, the program is selected more carefully, taking into account the type and color of the fabric. It’s easy to decide on the appropriate option, since modern models offer dozens of modes and functions.

The purpose of most programs is easy to guess - based on the standard designations for all washing machines.But it’s better to study the instructions again and get acquainted with the functionality offered on the model. It lists all modes and options, indicating their effectiveness, duration, temperature and spin speed. Having decided on the program, you can start washing. We proceed like this: programs on the washing machine Vyatka

insert the plug into the socket;
turn on the water supply;
load clothes into the drum (not forgetting about sorting laundry and loading standards);
close the hatch door tightly (the lock should click);
add detergent to the dispenser;
turn the selector to the selected program;
if necessary, manually change the standard program settings;
we start the cycle.

All! The Vyatka washing machine will indicate the end of the program with a sound signal. However, for safety reasons, the electronic lock on the hatch will only be released after 2-3 minutes. Then you can open the drum and take out clean clothes.

Where should I put the powder?

In the upper left corner of the Vyatka washing machine there is a powder dispenser through which detergent is added to the machine. Thanks to the special design of the tray, the powder is not washed out of it immediately, but enters the drum in doses, which ensures high-quality washing. It’s easy to use: just grab the handle-protrusion, pull it towards you and pour the concentrate into one of the compartments.

When adding detergent, keep the following rules in mind:

for automatic washing machines, only powders and gels marked “automatic” are used;
preference is given to high-quality and proven products on a natural basis, without phosphates and aggressive bleaches;
delicate fabrics are washed with special gels that completely dissolve in cold water;
products must be dosed using measuring cups, caps and spoons;
It is advisable to have separate powders in the house for white, colored and black linen;
remember the purpose of each dispenser compartment (powder is added to compartment “I” during the preliminary program, “II” is added during the main wash, and additional liquid products, conditioner, softener, and bleach are added to “*”).

When adding powder, remember the dosage!

You can also add modern cleaning products to washing machines from Vyatka - washing wipes and gel capsules. They are more expensive, but safer and more effective due to their improved concentrated composition, targeted action and convenient form. The devices are placed directly into the drum.