How to change the cuff on an Ardo washing machine?

How to change the cuff on an Ardo washing machine The rubber seal of the drum is damaged due to careless handling of the equipment. For example, a foreign metal object left in clothing pockets can damage the gasket. Regardless of the reason, it is necessary to replace the hatch cuff of the Ardo washing machine as soon as possible. The system is no longer sealed and a leak occurs. Let's figure out how to repair the machine.

Let's buy a new part

First of all, you need to buy a new door seal. The best thing is to get the old seal and bring it with you to the store. The manager will offer you a spare part that is exactly the same as the one removed.

When purchasing a new cuff, it is important to tell the seller the article number (license plate) of the gasket.

If it is not possible to get an old rubber band before purchasing a new seal, the model and markings of the Ardo washing machine will serve as a guide. The “nameplate” on the cars is attached above the hatch - it is on it that all the information about the device is written (year of manufacture, series, number, etc.). It is better to photograph the entire factory label and show it to the manager. During the repair process, in addition to a new sealing collar, you will need a slotted screwdriver and pliers. You should also have liquid soap and a sponge on hand. Having prepared everything you need, you can begin work. cuff for washing machine Ardo

Correct removal of the old cuff

To change the rubber seal, you will first have to remove the old cuff. The gasket is fixed in the machine with an external and internal clamp. These “rings” must be removed by loosening the latch. You should proceed like this:

Use your hands to find the outer “ring.” Ardo washing machines have a clamp made of plastic;
use a screwdriver to hook the “spring” of the rim, pull the lock to the side and remove the clamp;
remove the bottom decorative panel of the washing machine, behind which the garbage filter is hidden;
remove the powder receptacle from the machine;
unscrew the bolts securing the front wall of the case;
Carefully set the front panel aside without damaging the UBL wiring;
Use a screwdriver to pry up the inner rim in the same way as the outer clamp. Remove the plastic ring from the washer;
Carefully remove the cuff from the recess.

This is how you can remove the cuff. When you have the seal in your hands, you need to carefully inspect it, find all the cuts and cracks on the surface. This will help you understand what caused the gasket damage and prevent a similar situation from happening again.

Installation of a new rubber band

Installing a new door seal is a little more difficult than removing the rubber band. You will have to apply force to get the gasket to “fit” into the grooves. But if you follow all the recommendations, even a beginner can cope with such work. The algorithm of actions is as follows:

clean the seat. Soap and a sponge will come in handy for this. It is important to remove all dirt and debris from the recess. After washing the area, do not wipe it dry - the foam will make the process of installing the cuff easier;
Find the mounting marks on the rubber seal. Connect them with the markings on the body;

The drain holes on the cuff should be strictly at the bottom.

place the gasket in the recess;
place the drum cuff around the entire circumference
install and secure the internal retaining clamp;
assemble the washing machine body by returning the front panel to its place and securing it with self-tapping screws;
reinstall the lower decorative panel;
Pull the outer edge of the cuff over the protrusion of the drum;
Place the outer clamp into the recess, always with the spring down, and pull the rim around the circumference.

This is how you can change the rubber seal on your Ardo washing machine. Next you need to check the system for leaks. To do this, run a short mode, for example, “Rinse”. It is important not to leave the machine during the test cycle in order to notice a leak in time and promptly react to it.

Causes of cuff damage

Although removing the cuff and installing a new one is not so difficult, it is better not to carry it through to repairs. The rubber seal can properly perform its functions for 10 or 15 years, if you use the equipment carefully and carefully, avoiding premature damage to the gasket. There are several reasons why the door cuff becomes unusable. It could be:

inaccurate replacement. It is very easy to pierce the rubber during the installation process, for example, with a sharp movement with a screwdriver. Therefore, you need to very carefully tighten the seal and secure it with clamps;
low-quality detergents. Aggressive chemicals used for washing or cleaning an automatic washing machine can cause deformation of the cuff. Therefore, it is better to choose formulations without critical components that can have a detrimental effect on the rubber elements of the washer;
increased friction. If you constantly exceed the permissible load weight, the laundry will rub against the compactor with great force. Buttons and sharp decor on things can ruin the elastic;
damage from sharp objects caught in the drum. For example, a bra wire will pierce a soft cuff in an instant. In addition, keys and hairpins left in the pockets of things can cause harm;
careless operation.The condition of the pad may deteriorate due to careless loading and unloading of laundry from the drum;
mold and mildew. If you do not follow the basic rules - do not ventilate the machine and do not wipe the cuff and drum walls dry, harmful microorganisms will begin to attack the “insides”. Fungal plaque and moldy deposits will “eat” the gum from the inside over time.

By following the basic rules and using the washer carefully, you can delay the wear of the drum seal for a long time. But if you notice that it has begun to leak from under the hatch door, do not delay repairs. It is necessary to inspect the seal as quickly as possible and replace it if necessary.

Interesting:

2 reader comments

02.10.2022 at 02:22
Vladimir:

Guys, in not a single comment or video has any great master explained how, when replacing the cuff of the hatch of the Ardo A 610 washing machine, put the nipple of the cuff into the lower hole of the plastic tank of the machine. These are all the specialists.

I explain how to do this, what I reached on my own, without great masters and without any video on YouTube. Simply turn over the Ardo A 610 machine and similar ones with the top side down, i.e., with the legs up, we place it with an inclination of about 30-45 degrees. As a result, the opening of the plastic tank is at the top, and not at the bottom, in its normal state. Lubricate the new cuff with the nipple with a sponge and soap.At the place where the nipple is attached, we lubricate it with sealant, maybe automotive, waterproof or heat-resistant, and calmly insert the nipple into the hole in the tank. Let the sealant dry according to the instructions, then we put the inside of the cuff on the grooves around the circumference of the tank, pull the metal hoop over the cuff and tighten the bolt on the hoop. Before doing this, you need to check that the cuff is firmly seated on the protruding surface of the tank circumference.

Only after this we put the outer part of the cuff on the outer side of the front wall of the machine and fasten it with a metal hoop with a spring around the entire circumference. I hope I explained it clearly.

And all the “specialists” who repair these devices are simply embarrassed and disgraced. No one explained correctly how to do it. But in this machine the front door cannot be removed at all, it is simply welded tightly and in the usual position of the washing machine - with the lid up, it is simply impossible to put the nipple on the opening of the tank. That's it, woeful specialists. Learn.

Answer
02/25/2023 at 14:49
Nikolai:

Is the front of the Ardo 800x not collapsible?

Answer